how to reset the tire pressure light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

422 words

Problem Statement

Learn how to reset the tire pressure light on Honda CR-V (2017-2022). Step-by-step guide with diagnostic procedures and tips for maintaining tire pressure.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always check tire pressure when the tires are cold for an accurate reading.

Symptoms

•Tire pressure warning light is illuminated on the dashboard
•Potentially low tire pressure in one or more tires
•Tire pressure monitoring system may not be displaying accurate readings
•Warning message on the display indicating low tire pressure

Diagnostic Steps

1
Verify that all tires are inflated to the manufacturer's recommended pressure.
2
Check for any visible damage or punctures on the tires.
3
Use an OBD-II scanner to check for any fault codes related to the TPMS.
4
Confirm that the spare tire is either properly inflated (if equipped with a TPMS sensor) or not monitored.
5
Inspect the TPMS sensors for proper functioning or damage.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner

Parts Required

•None required for resetting; ensure tires are properly inflated.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all tires are inflated to the manufacturer's recommended pressure.
2
Check for any visible damage or punctures on the tires.
3
Use an OBD-II scanner to check for any fault codes related to the TPMS.
4
Confirm that the spare tire is either properly inflated (if equipped with a TPMS sensor) or not monitored.
5
Inspect the TPMS sensors for proper functioning or damage.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Turn the ignition to the "On" position without starting the engine.

2. Resetting the TPMS

Locate the TPMS reset button. This is usually found beneath the steering column or near the left side of the dashboard.
Press and hold the TPMS reset button until the TPMS indicator light blinks twice, then release the button.
Start the engine and wait for about 20 minutes while driving at speeds above 30 mph to allow the system to reset.

3. Check Functionality

After the reset process, turn off the engine.
Start the engine again to confirm that the tire pressure warning light has turned off.
If the light remains on, repeat the reset process, ensuring that all tires are properly inflated.