FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil light on Honda CR-V Sixth Generation (2023-present) - Honda CR-V
Home/Cars/Honda/CR-V/Sixth Generation (2023-present)/how to reset the oil light on Honda CR-V Sixth Generation (2023-present)

how to reset the oil light on Honda CR-V Sixth Generation (2023-present)

Honda CR-V Sixth Generation (2023-present)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
369 words

Problem Statement

Learn how to reset the oil light on Honda CR-V Sixth Generation (2023-present) after an oil change. Step-by-step guide for a quick reset.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and the engine is off before performing the reset.

Symptoms

  • •Oil change required warning light illuminated on the dashboard
  • •Maintenance Minder message displayed
  • •Engine oil has been changed but warning light remains on

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools: None required for this procedure.
  • Ensure the vehicle is parked safely with the engine off.
2. Reset the Oil Light
  1. Turn the ignition to the "ON" position without starting the engine.
  2. Use the "Select/Reset" button located on the dashboard.
  3. Press the button until the "Oil Life" indicator is shown on the display.
  4. Press and hold the "Select/Reset" button for approximately 10 seconds; you should see the oil life percentage begin to blink.
  5. Release the button, then press and hold it again for about 5 seconds until the oil life resets to 100%.
  6. Turn the ignition off and then back on to confirm the reset was successful.