how to reset the maintenance light on my Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes

10 minutes

Time

easy

Difficulty

low

Severity

2 min read

388 words

Problem Statement

Learn how to reset the maintenance light on your Honda CR-V Fifth Generation (2017-2022) with this easy step-by-step guide.

Affected Component

Electrical

Estimated Time

10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and is on a flat surface before starting the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•The vehicle's maintenance schedule reminder may be overdue
•No other performance-related symptoms present

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the keys are removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Verify that the maintenance light is illuminated on the dashboard.
4
Locate the 'Odometer' or 'Trip' button on the dashboard.
5
Press and hold the 'Odometer' or 'Trip' button until the display shows 'Maintenance Reset' or similar message.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure that the vehicle is parked in a safe location with the ignition off.

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the keys are removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Verify that the maintenance light is illuminated on the dashboard.
4
Locate the 'Odometer' or 'Trip' button on the dashboard.
5
Press and hold the 'Odometer' or 'Trip' button until the display shows 'Maintenance Reset' or similar message.

Solution

1. Preparation

Tools Required: None
Ensure that the vehicle is parked in a safe location with the ignition off.

2. Turn on the Ignition

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Confirm that all dashboard lights, including the maintenance light, come on.

3. Reset the Maintenance Light

Locate the "Odometer" or "Trip" button on the dashboard.
Press and hold the "Odometer" or "Trip" button.
While holding the button, turn the ignition switch to the "OFF" position and then back to the "ON" position (do not start the engine).
Continue to hold the button until the maintenance light blinks and then goes out, indicating that the reset is successful.

4. Verify the Reset

Release the "Odometer" or "Trip" button.
Turn the ignition off and then back on to check that the maintenance light is no longer illuminated.