how to reset the maintenance light on my Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

346 words

Problem Statement

Learn how to reset the maintenance light on your Honda CR-V Fifth Generation (2017-2022) after routine maintenance. Step-by-step guide included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before starting the reset process.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Vehicle owner feels the need to reset the light after an oil change or service
•No other warning lights are present

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press the 'Start' button without pressing the brake pedal to turn the ignition to the 'ON' position.
3
Locate the 'Menu' button on the steering wheel and press it to access the vehicle settings.
4
Use the arrow buttons to navigate to 'Maintenance.'
5
Select 'Oil Life' and press 'Reset' when prompted.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press the 'Start' button without pressing the brake pedal to turn the ignition to the 'ON' position.
3
Locate the 'Menu' button on the steering wheel and press it to access the vehicle settings.
4
Use the arrow buttons to navigate to 'Maintenance.'
5
Select 'Oil Life' and press 'Reset' when prompted.

Solution

1. Preparation

Gather necessary tools: none required for this reset.
Ensure the vehicle is parked on a level surface and the ignition is off.

2. Ignition Position

Put the key in the ignition or press the "Start" button without pressing the brake pedal to turn the ignition to the "ON" position.

Press the "Menu" button on the steering wheel to bring up the vehicle settings.
Use the arrow buttons to navigate through the menu until you reach "Maintenance."

4. Reset Oil Life

Select "Oil Life" using the arrow buttons.
When prompted, press the "Reset" button to clear the maintenance light.
Confirm the reset if necessary.

5. Turn Off Ignition

Press the "Start" button again to turn off the vehicle.