how to reset the maintenance light on Honda CR-V Sixth Generation (2023-present)

Honda CR-V Sixth Generation (2023-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

349 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V Sixth Generation (2023-present) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure location to prevent rolling or unintended movement while working on the dashboard.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or service displayed
•Vehicle performance issues may occur if maintenance is not performed

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Locate the odometer/trip button on the dashboard.
3
Verify that the maintenance light is on the dashboard before proceeding.
4
Press and hold the odometer/trip button.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver (optional for accessing the button)

Parts Required

•No parts are required for this reset.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked and in a safe location.
Gather necessary tools, if any, such as a flathead screwdriver (optional for accessing the button).

2. Turn On the Ignition

Turn the ignition switch to the "On" position (do not start the engine).
Confirm that all dashboard lights illuminate, including the maintenance light.

3. Reset the Maintenance Light

Press and hold the odometer/trip button until the display shows "Maintenance Reset" or displays a series of dashes.
Continue holding the button until the maintenance light blinks and then goes off.

4. Confirm the Reset

Release the odometer/trip button.
Turn the ignition off and then back to "On" to ensure the maintenance light is no longer illuminated.