how to reset the maintenance light on Honda CR-V Sixth Generation (2023-present)

Honda CR-V Sixth Generation (2023-present)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

318 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V Sixth Generation (2023-present) with this simple step-by-step guide.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position and not in motion while performing this reset.

1
Ensure the vehicle is in the OFF position.
2
Press and hold the trip button on the instrument panel.
3
Turn the ignition switch to the ON position without starting the engine while continuing to hold the trip button.
4
Wait for the maintenance light to blink and then turn off.
5
Release the trip button once the light is off.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is in the OFF position.
2
Press and hold the trip button on the instrument panel.
3
Turn the ignition switch to the ON position without starting the engine while continuing to hold the trip button.
4
Wait for the maintenance light to blink and then turn off.
5
Release the trip button once the light is off.

Solution

1. Preparation

2. Resetting the Maintenance Light

Position the Vehicle: Place the vehicle in a safe, well-ventilated area and ensure it is in the OFF position.
Hold the Trip Button: Locate the trip button on the instrument panel and press and hold it.
Ignition Switch: Turn the ignition switch to the ON position without starting the engine while keeping the trip button pressed.
Observe the Maintenance Light: Watch the maintenance light on the dashboard; it should blink before turning off completely.
Release the Trip Button: Once the maintenance light is off, release the trip button.