how to reset the maintenance light on Honda CR-V Sixth Generation (2023-present)

Honda CR-V Sixth Generation (2023-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

373 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V Sixth Generation (2023-present) after scheduled maintenance. Step-by-step guide included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked in a safe location before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder notification for maintenance service displayed
•Engine oil change message (if applicable)

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition (or press the start button without pressing the brake pedal).
3
Press the 'Engine Start/Stop' button without pressing the brake pedal to turn the ignition to the 'ON' position.
4
Use the steering wheel buttons to navigate to the 'Settings' menu on the display.
5
Select 'Maintenance' from the options.
6
Choose 'Oil Life' or the relevant maintenance item to reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key
•Key fob

Parts Required

•None (as this is a reset procedure)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition (or press the start button without pressing the brake pedal).
3
Press the 'Engine Start/Stop' button without pressing the brake pedal to turn the ignition to the 'ON' position.
4
Use the steering wheel buttons to navigate to the 'Settings' menu on the display.
5
Select 'Maintenance' from the options.
6
Choose 'Oil Life' or the relevant maintenance item to reset.

Solution

1. Preparation

Gather necessary tools:
- Vehicle key or key fob (for push start)
Ensure the vehicle is parked safely with the ignition off.

2. Access the Ignition

Insert the key into the ignition or have the key fob ready.
Turn the ignition to the "ON" position without starting the engine.

3. Navigate to Maintenance Settings

Use the steering wheel controls to find the “Settings” menu on the dashboard display.
Scroll to "Maintenance" and select it.

4. Reset the Maintenance Light

Choose the “Oil Life” option or the specific service item that needs resetting.
Select the "Reset" option and confirm the reset when prompted.

5. Verify Reset

Exit the settings by pressing the "Back" button.
Check the dashboard to ensure the maintenance light is turned off.