FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light in Honda CR-V Fifth Generation (2017-2022) - Honda CR-V
Home/Cars/Honda/CR-V/Sixth Generation (2023-present)/how to reset the maintenance light in Honda CR-V Fifth Generation (2017-2022)

how to reset the maintenance light in Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
376 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V (2017-2022) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing the reset process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Notification message about upcoming maintenance displayed
  • •No other performance issues present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools.
  • Ensure the vehicle is parked safely with the engine off.
2. Resetting the Maintenance Light

  1. Turn Off the Vehicle

    • Make sure the car is completely off before beginning the reset process.

  2. Press and Hold the Button

    • Locate the "Select/Reset" button on the instrument panel.
    • Press and hold this button down.

  3. Ignition to "ON"

    • Without starting the engine, turn the ignition switch to the "ON" position (the position just before starting the engine).

  4. Wait for the Light to Blink

    • Keep holding the "Select/Reset" button until the maintenance light starts blinking.
    • This usually takes about 10 seconds.

  5. Release the Button

    • Once the light blinks, release the "Select/Reset" button.
    • The maintenance light should now go off.

  6. Turn Off the Ignition

    • Turn the ignition back to the "OFF" position to complete the reset process.