how to reset the check engine light in my Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

395 words

Problem Statement

Learn how to reset the check engine light on your Honda CR-V (2017-2022). Step-by-step guide with diagnostic steps and safety tips included.

Affected Component

Engine

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral and the parking brake is engaged before starting the reset process.

Symptoms

•Check engine light illuminated
•Possible error codes stored in the OBD-II system
•No noticeable performance changes (if the issue is resolved)
•Engine performance issues prior to resetting (if applicable)

Diagnostic Steps

1
Use an OBD-II scanner to check for stored error codes.
2
Address any underlying issues that caused the check engine light to illuminate.
3
Clear the error codes using the OBD-II scanner.
4
Turn off the ignition and then restart the engine to verify if the check engine light remains off.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None required for the reset procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather required tools and parts for the reset (OBD-II scanner).
Ensure the engine is off before connecting the scanner.

2. Connect OBD-II Scanner

Locate the OBD-II port under the dashboard near the steering column.
Plug the OBD-II scanner into the port.

3. Scan for Error Codes

Turn the ignition to the "ON" position without starting the engine.
Follow the scanner's prompts to read stored error codes.
Record any codes for reference.

4. Clear Error Codes

Use the OBD-II scanner's function to "Clear Codes" or "Erase Codes."
Confirm the action when prompted by the scanner.

5. Disconnect OBD-II Scanner

Unplug the OBD-II scanner from the port.
Ensure no wires are damaged during disconnection.

6. Test the Vehicle

Start the engine and observe if the check engine light is off.
If the light remains on, further diagnostics may be needed.