how to fix the sunroof on my Honda CR-V Fifth Generation (2017-2022) that won’t close

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

501 words

Problem Statement

Learn how to diagnose and fix a sunroof that won't close on your Honda CR-V (2017-2022). Step-by-step guide with symptoms, tools, and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shock or short circuits.
•Allow the vehicle's interior components to cool before handling to avoid burns.

Symptoms

•Sunroof does not respond when the close button is pressed
•Sunroof partially closes and then stops
•Unusual noises (grinding or clicking) when attempting to close the sunroof
•Sunroof opens without issue but fails to close completely
•Dashboard warning lights illuminated related to the sunroof or electrical system

Diagnostic Steps

1
Inspect the sunroof for any visible obstructions or debris along the tracks.
2
Check the sunroof switch for functionality using a multimeter to ensure it is sending power.
3
Scan the vehicle’s OBD-II system for any related error codes.
4
Inspect the sunroof motor and wiring for signs of damage or wear.
5
Test the sunroof relay for proper operation.
6
Verify the sunroof control module functionality if equipped.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Multimeter
•Flathead screwdriver
•Torx screwdriver
•Clean cloth

Parts Required

•Sunroof motor (if faulty)
•Sunroof switch (if faulty)
•Sunroof relay (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Sunroof does not respond when the close button is pressed

•Sunroof partially closes and then stops

•Unusual noises (grinding or clicking) when attempting to close the sunroof

•Sunroof opens without issue but fails to close completely

•Dashboard warning lights illuminated related to the sunroof or electrical system

Diagnostic Steps

1
Inspect the sunroof for any visible obstructions or debris along the tracks.
2
Check the sunroof switch for functionality using a multimeter to ensure it is sending power.
3
Scan the vehicle’s OBD-II system for any related error codes.
4
Inspect the sunroof motor and wiring for signs of damage or wear.
5
Test the sunroof relay for proper operation.
6
Verify the sunroof control module functionality if equipped.

Solution

1. Preparation

Gather tools: socket set, multimeter, flathead screwdriver, Torx screwdriver, and a clean cloth.
Disconnect the vehicle battery to ensure safety while working on the electrical components.

2. Inspect and Clean

Remove any debris from the sunroof tracks using a clean cloth.
Inspect the drainage channels for blockages and clear them if necessary.

3. Check the Switch

Remove the sunroof switch from the overhead console using a flathead screwdriver.
Using a multimeter, test the continuity of the switch. If it fails, replace the switch.

4. Test the Sunroof Motor

Access the sunroof motor by removing the headliner (if required).
Disconnect the motor's electrical connector and use a multimeter to check for voltage when the close button is pressed.
If there is voltage but the motor does not operate, replace the sunroof motor.

5. Replace the Relay

Locate the sunroof relay in the fuse box.
Remove the relay and test it; replace if it is defective.

6. Reassemble and Test

Reconnect any components that were removed.
Reconnect the vehicle battery.
Test the sunroof operation by attempting to close it.