how to fix the rearview camera not working on my Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Sixth Generation (2023-present)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

504 words

Problem Statement

Learn how to diagnose and fix the rearview camera not working in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent short circuits.

Symptoms

•Rearview camera screen is blank or displays a blue screen.
•Camera feed intermittently cuts out or freezes.
•"Camera System Error" message displayed on the dashboard.
•No sound or notification when the vehicle is in reverse.
•Physical damage or dirt on the camera lens.

Diagnostic Steps

1
Check for any error messages on the dashboard related to the camera system.
2
Inspect the rearview camera lens for physical damage or obstructions.
3
Verify the vehicle's battery voltage is within the normal range.
4
Use an OBD-II scanner to check for any fault codes related to the camera system.
5
Inspect the wiring and connections leading to the rearview camera for any signs of damage or corrosion.
6
Test the camera functionality by connecting it to a multimeter to ensure it is receiving power.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdriver set
•Trim removal tool

Parts Required

•Rearview camera (if replacement is needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any error messages on the dashboard related to the camera system.
2
Inspect the rearview camera lens for physical damage or obstructions.
3
Verify the vehicle's battery voltage is within the normal range.
4
Use an OBD-II scanner to check for any fault codes related to the camera system.
5
Inspect the wiring and connections leading to the rearview camera for any signs of damage or corrosion.
6
Test the camera functionality by connecting it to a multimeter to ensure it is receiving power.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the negative battery terminal to ensure safety during repairs.

Tools Required:

OBD-II scanner
Multimeter
Socket set
Screwdriver set
Trim removal tool

2. Inspect and Clean the Camera Lens

Locate the rearview camera, typically mounted above the license plate.
Use a soft cloth and automotive glass cleaner to clean the camera lens thoroughly.
Check for any cracks or physical damage. If damaged, proceed to replace the camera.

3. Check and Repair Wiring

Remove any interior panels or trim covering the wiring harness leading to the camera.
Inspect the wiring for frayed or broken wires. Repair any damaged sections with electrical tape or replace the wiring harness if necessary.
Ensure all connectors are secure and free from corrosion.

4. Test Camera Functionality

Reconnect the wiring and reconnect the negative battery terminal.
Start the vehicle and shift into reverse to test the camera system.
If the camera is still non-functional, replace the rearview camera with a new unit.

Parts Required:

Rearview camera (if replacement is needed)

5. Reassemble and Secure Panels

Reinstall any removed panels or trim, ensuring all clips and screws are securely fastened.
Perform a final check of the camera function after reassembly.