how to fix the intermittent wipers on my Honda CR-V Fifth Generation (2017-2022)?

Honda CR-V Sixth Generation (2023-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

420 words

Problem Statement

Learn how to diagnose and fix intermittent wipers on Honda CR-V (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid shorts or shocks.

Symptoms

•Intermittent wipers do not activate at all
•Wipers operate continuously instead of intermittently
•Wipers only function on the high-speed setting
•Wiper control stalk feels loose or unresponsive
•Wipers operate erratically, moving at inconsistent speeds

Diagnostic Steps

1
Inspect the wiper control stalk for any physical damage or looseness.
2
Check the vehicle’s fuses related to the wiper system using the fuse box diagram.
3
Scan the vehicle’s onboard diagnostics (OBD-II) for any codes related to the wiper system.
4
Test the wiper motor for proper operation by applying direct power to the motor.
5
Examine the wiper relay for signs of failure or malfunction.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Screwdriver set
•Torx bits
•Multimeter

Parts Required

•New wiper control stalk (if necessary)
•New wiper relay (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the wiper control stalk for any physical damage or looseness.
2
Check the vehicle’s fuses related to the wiper system using the fuse box diagram.
3
Scan the vehicle’s onboard diagnostics (OBD-II) for any codes related to the wiper system.
4
Test the wiper motor for proper operation by applying direct power to the motor.
5
Examine the wiper relay for signs of failure or malfunction.

Solution

1. Preparation

Gather tools and parts needed.
Disconnect the vehicle battery to ensure safety.

2. Remove the Wiper Control Stalk

Tools Required: Screwdriver set, Torx bits
Remove the steering column covers by unscrewing the screws located underneath.
Carefully detach the control stalk from its mounting position.

3. Inspect the Wiper Control Stalk

Check for any visible damage or wear on the stalk.
If damaged, replace with a new wiper control stalk.
Parts Required: New wiper control stalk (if necessary)

4. Test and Replace the Wiper Relay

Tools Required: Multimeter
Locate the wiper relay in the fuse box.
Use a multimeter to test the relay for continuity.
Replace the relay if it is faulty.
Parts Required: New wiper relay (if necessary)

5. Reassemble the Components

Reattach the wiper control stalk and secure the steering column covers.
Reconnect the vehicle battery.