how to fix Honda CR-V Fifth Generation (2017-2022) windshield wipers that won't turn off

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

497 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix windshield wipers that won't turn off in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks and shorts.
•Allow the vehicle to cool down before working under the hood.

Symptoms

•Windshield wipers continuously running
•Wiper control stalk non-responsive
•Wipers not stopping after switching the ignition off
•Possible burning smell from the wiper motor
•Intermittent wiper function may be erratic

Diagnostic Steps

1
Inspect the wiper control stalk for damage or obstructions.
2
Use an OBD-II scanner to check for error codes related to the windshield wiper system.
3
Check the wiper relay in the fuse box for proper function.
4
Remove and inspect the wiper motor connector for corrosion or loose connections.
5
Test the wiper motor with a multimeter to check for proper voltage and ground.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdriver set

Parts Required

•Wiper control stalk (if defective)
•Wiper relay (if defective)
•Wiper motor (if defective)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the wiper control stalk for damage or obstructions.
2
Use an OBD-II scanner to check for error codes related to the windshield wiper system.
3
Check the wiper relay in the fuse box for proper function.
4
Remove and inspect the wiper motor connector for corrosion or loose connections.
5
Test the wiper motor with a multimeter to check for proper voltage and ground.

Solution

1. Preparation

Gather tools: OBD-II scanner, multimeter, socket set, screwdriver set.
Disconnect the vehicle battery to prevent electrical shock.

2. Remove the Wiper Control Stalk

Use a screwdriver to remove the steering column cover.
Disconnect the wiring harness from the wiper control stalk.
Remove the screws securing the wiper control stalk and take it out.

3. Inspect and Replace the Wiper Relay

Locate the fuse box under the dashboard or in the engine compartment.
Identify the wiper relay (refer to the vehicle's manual for the specific location).
Remove the relay and test it using a multimeter for continuity.
If defective, replace the relay with a new one.

4. Check and Repair the Wiper Motor

Locate the wiper motor assembly, typically found under the windshield cowl.
Disconnect the wiring harness from the wiper motor.
Use a multimeter to check for proper voltage and ground at the motor connector.
If the motor receives power but does not function, it may need to be replaced.

5. Reassemble and Test

Reconnect the wiper motor and control stalk.
Replace the steering column cover and secure it with screws.
Reconnect the battery and test the wiper operation in all modes to confirm they turn off properly.