how to fix Honda CR-V Fifth Generation (2017-2022) remote start not working

Honda CR-V Sixth Generation (2023-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

510 words

Problem Statement

Learn how to diagnose and fix the remote start issue in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with symptoms and solutions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on the vehicle's electrical systems to prevent accidental short circuits.

Symptoms

•Remote start button does not respond when pressed
•Check engine light illuminated
•Vehicle security indicator flashing
•Key fob battery low warning displayed
•No engine start or crank sound when attempting remote start

Diagnostic Steps

1
Verify that the key fob battery is functional by testing the standard lock/unlock functions.
2
Check for any error codes using an OBD-II scanner to identify potential issues with the engine or security system.
3
Inspect the vehicle's security system to ensure it recognizes the key fob.
4
Examine the remote start system's wiring and connections for any visible damage or disconnections.
5
Confirm that all vehicle doors are securely closed, as the remote start feature may not function if any door is ajar.
6
Test the remote start function with a spare key fob, if available, to rule out a faulty key fob.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Flathead screwdriver
•Torx screwdriver

Parts Required

•CR2032 battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that the key fob battery is functional by testing the standard lock/unlock functions.
2
Check for any error codes using an OBD-II scanner to identify potential issues with the engine or security system.
3
Inspect the vehicle's security system to ensure it recognizes the key fob.
4
Examine the remote start system's wiring and connections for any visible damage or disconnections.
5
Confirm that all vehicle doors are securely closed, as the remote start feature may not function if any door is ajar.
6
Test the remote start function with a spare key fob, if available, to rule out a faulty key fob.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked safely with the engine off.
Tools Required: OBD-II scanner, multimeter, flathead screwdriver, Torx screwdriver.

2. Replace Key Fob Battery

Open the key fob using a flathead screwdriver.
Remove the old battery and replace it with a new CR2032 battery, ensuring correct polarity.
Reassemble the key fob and test the remote start function.

3. Clear Error Codes

Connect the OBD-II scanner to the vehicle’s diagnostic port.
Turn the ignition to the "ON" position without starting the engine.
Follow the scanner instructions to read and clear any error codes.
Disconnect the scanner and check if the remote start feature is functional.

4. Inspect Security System

Check the vehicle's security system by visually inspecting the wiring and connectors around the ignition and door locks.
Ensure that all connections are secure, and there are no visible signs of damage.
If necessary, reconnect any loose wires and secure the connections.

5. Test Remote Start System

With the vehicle in a safe location, attempt to use the remote start function again.
If it still does not work, consider consulting the vehicle's manual for specific remote start system troubleshooting.