how to fix Honda CR-V Fifth Generation (2017-2022) dashboard warning lights

Honda CR-V Sixth Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

622 words

Problem Statement

Learn how to diagnose and fix dashboard warning lights on Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before inspecting components related to the cooling system.

Symptoms

•Check engine light illuminated
•ABS warning light activated
•Tire pressure monitoring system (TPMS) light on
•Battery warning light illuminated
•Oil pressure warning light active
•Stability control light illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Check fluid levels (engine oil, coolant, brake fluid, etc.) to ensure they are within recommended ranges.
3
Inspect individual warning light sensors for defects or disconnections.
4
Verify tire pressures to ensure they are at manufacturer-recommended levels.
5
Test the battery and charging system to ensure proper voltage output.
6
Inspect the brake system components for leaks or wear that could trigger the ABS warning.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Tire pressure gauge
•Basic socket set
•Brake cleaner

Parts Required

•Oxygen sensor (if needed)
•ABS sensor (if needed)
•Tire pressure sensors (if damaged)
•Battery (if needed)
•Oil pressure switch (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Check fluid levels (engine oil, coolant, brake fluid, etc.) to ensure they are within recommended ranges.
3
Inspect individual warning light sensors for defects or disconnections.
4
Verify tire pressures to ensure they are at manufacturer-recommended levels.
5
Test the battery and charging system to ensure proper voltage output.
6
Inspect the brake system components for leaks or wear that could trigger the ABS warning.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative terminal of the battery for safety.

2. Address Check Engine Light

Sub-step 1: Use the OBD-II scanner to retrieve fault codes.
Sub-step 2: Research each code to determine the necessary repairs (e.g., replace oxygen sensor, fix vacuum leak).
Sub-step 3: Make required repairs and clear the codes using the OBD-II scanner.

3. Resolve ABS Warning Light

Sub-step 1: Check the ABS fuse in the fuse box; replace if blown.
Sub-step 2: Inspect ABS wheel speed sensors for damage or dirt; clean or replace as necessary.
Sub-step 3: Test the ABS system with a specialized scanner to ensure proper function after repairs.

4. Fix Tire Pressure Monitoring System (TPMS) Light

Sub-step 1: Inflate tires to the recommended PSI as indicated on the driver’s door jamb.
Sub-step 2: If the light remains on, reset the TPMS using the reset button located under the steering column.
Sub-step 3: Inspect tire pressure sensors for damage and replace if necessary.

5. Check Battery Warning Light

Sub-step 1: Test battery voltage using a multimeter; a healthy battery should read around 12.6 volts.
Sub-step 2: If voltage is low, charge or replace the battery.
Sub-step 3: Inspect the alternator; check voltage output while the engine is running (should be between 13.7 and 14.7 volts).

6. Address Oil Pressure Warning Light

Sub-step 1: Check engine oil level using the dipstick; add oil if low.
Sub-step 2: If oil level is adequate, test the oil pressure with a gauge to ensure it meets manufacturer specifications.
Sub-step 3: Replace the oil pressure switch if it is found to be faulty.