why is my Honda CR-V Fifth Generation (2017-2022) AC blowing hot air

Honda CR-V 6th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

529 words

Problem Statement

Complete guide to fixing AC that blows warm air in Honda CR-V 2017-2022. Includes symptoms, diagnostic steps, tools required, and repair procedures.

Affected Component

HVAC

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Wear safety glasses and gloves when handling refrigerants.

Symptoms

•AC compressor not engaging
•Warm air blowing from vents
•Unusual noises from the AC system
•AC clutch not cycling
•Foul odor emanating from vents

Diagnostic Steps

1
Check the AC system for any error codes using an OBD-II scanner.
2
Inspect the refrigerant levels in the system; low levels may indicate a leak.
3
Examine the AC compressor for signs of damage or wear.
4
Test the AC clutch operation to ensure it engages when the AC is turned on.
5
Check the cabin air filter for clogs or blockages that may restrict airflow.
6
Inspect electrical connections and fuses related to the AC system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Refrigerant gauge set
•Socket set
•Screwdriver set

Parts Required

•AC compressor (if faulty)
•Refrigerant
•Cabin air filter

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the AC system for any error codes using an OBD-II scanner.
2
Inspect the refrigerant levels in the system; low levels may indicate a leak.
3
Examine the AC compressor for signs of damage or wear.
4
Test the AC clutch operation to ensure it engages when the AC is turned on.
5
Check the cabin air filter for clogs or blockages that may restrict airflow.
6
Inspect electrical connections and fuses related to the AC system.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is off.
Disconnect the battery to prevent electrical shock.

2. Check and Recharge Refrigerant

Locate the low-pressure service port on the AC system.
Use a refrigerant gauge to check the refrigerant level.
- Tools Required: Refrigerant gauge set, refrigerant canister.
If levels are low, connect the refrigerant canister and slowly add refrigerant until the correct pressure is achieved according to manufacturer specifications.

3. Inspect and Repair AC Compressor

Visually inspect the compressor for any signs of leaks or physical damage.
If the compressor is faulty, remove it by:
1. Disconnecting electrical connectors.
2. Removing the drive belt using a socket set.
3. Unbolting the compressor from its bracket.
Replace with a new compressor and ensure proper alignment.
- Torque Specification: Follow manufacturer specifications for bolt torque.

4. Replace Cabin Air Filter

Locate the cabin air filter compartment, usually behind the glove box.
Remove the glove box to access the filter.
Take out the old filter and replace it with a new one.
Ensure the filter is installed in the correct orientation.

5. Reconnect Battery and Test System

Reconnect the battery terminals.
Start the vehicle and turn on the AC to test if cold air is now blowing through the vents.