why does my Honda CR-V Fifth Generation (2017-2022) transmission jerk when accelerating

Honda CR-V 6th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

600 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission or working under the vehicle.

Symptoms

•Jerking or shuddering during acceleration
•Delayed or harsh shifting between gears
•Unusual noises during gear changes (e.g., grinding or clunking)
•Check engine light illuminated
•Decreased fuel efficiency

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes that may indicate transmission issues.
2
Check the transmission fluid level and condition; look for signs of contamination or burning.
3
Inspect the transmission mounts for wear or damage that could affect shifting.
4
Examine the throttle position sensor (TPS) for proper operation and alignment.
5
Test the vehicle’s battery and alternator to ensure they are supplying adequate voltage to the transmission control module.
6
Conduct a road test to replicate the symptoms and observe changes in behavior during acceleration.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Transmission fluid
•Funnel
•Multimeter

Parts Required

•Transmission fluid (specific to Honda specifications)
•Transmission filter (if applicable)
•Transmission mount(s) (if needed)
•Throttle position sensor (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes that may indicate transmission issues.
2
Check the transmission fluid level and condition; look for signs of contamination or burning.
3
Inspect the transmission mounts for wear or damage that could affect shifting.
4
Examine the throttle position sensor (TPS) for proper operation and alignment.
5
Test the vehicle’s battery and alternator to ensure they are supplying adequate voltage to the transmission control module.
6
Conduct a road test to replicate the symptoms and observe changes in behavior during acceleration.

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, torque wrench, transmission fluid, funnel.
Ensure the vehicle is parked on a level surface and the engine is cool before starting work.
Disconnect the negative battery terminal to avoid electrical shorts.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick and remove it.
2. Use a funnel to add new transmission fluid if the level is low. If the fluid is dirty or burnt, proceed to replace it.
3. Remove the transmission drain plug (if equipped) and drain the old fluid into a suitable container.
4. Replace the transmission filter (if applicable) by removing the transmission pan and replacing the filter.
5. Reinstall the transmission pan with new gasket and torque to manufacturer specifications.
6. Refill with the recommended transmission fluid type through the dipstick tube.

3. Inspect and Replace Transmission Mounts

Sub-steps:
1. Raise the vehicle with jack stands and ensure it is secure.
2. Locate the transmission mounts and visually inspect for cracks or signs of wear.
3. If damaged, remove the bolts securing the mount to the transmission and frame.
4. Install the new mount and torque bolts to specifications.
5. Recheck alignment and ensure the transmission is securely mounted.

4. Test Throttle Position Sensor

Sub-steps:
1. Locate the TPS, usually mounted on the throttle body.
2. Disconnect the electrical connector and use a multimeter to test the sensor's output voltage while moving the throttle.
3. If the readings are inconsistent or out of specification, replace the TPS.
4. Reconnect the electrical connector and clear any error codes from the OBD-II system.