why does my Honda CR-V Fifth Generation (2017-2022) transmission jerk during shifting

Honda CR-V 6th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

619 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before working on the transmission.

Symptoms

•Jerking or harsh shifting between gears
•Delay in engagement when shifting from park to drive or reverse
•Check engine light illuminated
•Slipping sensation during acceleration
•Unusual noises (clunking or grinding) during shifting
•Increased fuel consumption

Diagnostic Steps

1
Scan the vehicle’s onboard computer using an OBD-II scanner for any stored error codes.
2
Check the transmission fluid level and condition; look for any signs of discoloration or burning smell.
3
Inspect the transmission fluid cooler for leaks or blockages.
4
Test the transmission control module (TCM) for proper operation using a multimeter.
5
Examine the throttle position sensor (TPS) readings to ensure they are within specifications.
6
Conduct a road test to replicate the jerking issue and note the conditions under which it occurs.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Fluid pump
•Multimeter
•Torque wrench

Parts Required

•Honda Genuine ATF DW-1 transmission fluid
•Transmission filter
•Transmission pan gasket
•Throttle position sensor (if replacement is necessary)
•Transmission control module (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle’s onboard computer using an OBD-II scanner for any stored error codes.
2
Check the transmission fluid level and condition; look for any signs of discoloration or burning smell.
3
Inspect the transmission fluid cooler for leaks or blockages.
4
Test the transmission control module (TCM) for proper operation using a multimeter.
5
Examine the throttle position sensor (TPS) readings to ensure they are within specifications.
6
Conduct a road test to replicate the jerking issue and note the conditions under which it occurs.

Solution

1. Fluid Check and Replacement

Sub-steps:
1. Park the vehicle on a level surface and engage the parking brake.
2. Open the hood and locate the transmission dipstick.
3. Pull the dipstick, wipe it clean, and reinsert it to check the fluid level.
4. If the fluid is low or dirty, drain the old transmission fluid using a fluid pump.
5. Replace with Honda Genuine ATF DW-1 transmission fluid, ensuring the correct amount is added.

2. Inspect and Replace Transmission Filter

Sub-steps:
1. Remove the transmission pan by loosening the bolts with a socket set.
2. Gently pry off the pan and drain any remaining fluid.
3. Remove the old transmission filter and replace it with a new one.
4. Clean the transmission pan and replace the gasket before reattaching the pan.
5. Torque the pan bolts to manufacturer specifications.

3. Adjust or Replace Throttle Position Sensor (if necessary)

Sub-steps:
1. Disconnect the negative battery terminal to prevent electrical shorts.
2. Locate the throttle position sensor on the throttle body.
3. Disconnect the electrical connector and remove the mounting screws.
4. Install the new throttle position sensor, ensuring it is aligned properly.
5. Reconnect the electrical connector and the negative battery terminal.

4. Reprogram or Replace Transmission Control Module (if necessary)

Sub-steps:
1. Use the OBD-II scanner to check for any TCM-related error codes.
2. If reprogramming is required, follow the manufacturer’s procedures using the scanner.
3. If the TCM is faulty, remove it from its mounting location.
4. Install the new TCM and ensure all connectors are securely attached.