FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda CR-V Fifth Generation (2017-2022) engine stall at stoplights - Honda CR-V
Home/Cars/Honda/CR-V/6th Gen (2023-Present)/why does my Honda CR-V Fifth Generation (2017-2022) engine stall at stoplights

why does my Honda CR-V Fifth Generation (2017-2022) engine stall at stoplights

Honda CR-V 6th Gen (2023-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
658 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine stalling issues in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before starting any electrical work.

Symptoms

  • •Engine stalling or shutting off at stoplights
  • •Rough idle when the vehicle is stationary
  • •Check engine light illuminated
  • •Difficulty restarting the engine after stalling
  • •Poor fuel economy
  • •Unusual noises from the engine (e.g., sputtering)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Multimeter
  • •Vacuum gauge
  • •Throttle body cleaner

Parts Required

  • •Fuel filter (if necessary)
  • •Spark plugs (if necessary)
  • •Ignition coils (if necessary)
  • •Vacuum hoses (if necessary)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather Tools: OBD-II scanner, fuel pressure gauge, socket set, multimeter, vacuum gauge, cleaning supplies.
  • Safety Warning: Disconnect the battery before starting any electrical work.
2. Address Fuel Delivery Issues

  1. Check Fuel Pressure:

    • Connect the fuel pressure gauge to the fuel rail.
    • Turn the ignition to the "ON" position (without starting the engine) and record the pressure reading.
    • Compare it to the manufacturer specifications (typically around 40-50 psi).
    • If low, check the fuel pump, filter, and lines for clogs or failures.

  2. Replace Fuel Filter (if necessary):

    • Locate the fuel filter, usually along the fuel line.
    • Relieve fuel pressure by disconnecting the fuel pump fuse and starting the engine until it stalls.
    • Remove the old fuel filter and install the new one, ensuring proper orientation.
3. Inspect and Clean Throttle Body

  1. Remove Throttle Body:

    • Disconnect the air intake duct from the throttle body.
    • Remove any electrical connectors and bolts securing the throttle body.
    • Carefully detach the throttle body from the intake manifold.

  2. Clean Throttle Body:

    • Use throttle body cleaner and a soft cloth or brush to remove carbon buildup.
    • Ensure the throttle plate moves freely and is not sticking.
    • Reinstall the throttle body and reconnect all components.
4. Inspect Ignition Components

  1. Check Spark Plugs:

    • Remove the spark plugs using a socket.
    • Inspect for wear or carbon deposits; replace if necessary with OEM-spec plugs.
    • Ensure proper gap settings as specified in the owner's manual.

  2. Test Ignition Coils:

    • Use a multimeter to check resistance of each coil.
    • Replace any coils that are out of specification.
5. Check for Vacuum Leaks

  1. Inspect Hoses:

    • Visually examine all vacuum hoses for cracks or disconnections.
    • Use a vacuum gauge to check the intake manifold for proper readings.

  2. Repair or Replace Hoses:

    • Replace any damaged vacuum hoses to restore proper engine vacuum.