my Honda CR-V Sixth Generation (2023-present) won't start and just clicks what should I do

Solution

1. Preparation

• Gather tools: OBD-II scanner, multimeter, socket set, and jumper cables.
• Ensure the vehicle is in a safe, well-ventilated area.
• Disconnect the negative battery terminal to prevent any electrical shorts.

2. Battery Inspection

• 1. Inspect the battery: Look for physical damage or leaks.
• 2. Clean terminals: Use a wire brush to clean any corrosion from battery terminals.
• 3. Tighten connections: Ensure the battery terminals are securely fastened.

3. Starter Relay and Fuses

• 1. Locate the fuse box: Refer to the owner’s manual for the location.
• 2. Check fuses: Remove and inspect fuses related to the starting system, replacing any that are blown.
• 3. Swap starter relay: Replace the starter relay with a known good one to test functionality.

4. Starter Motor Test

• 1. Reconnect the battery terminal.
• 2. Have an assistant attempt to start the vehicle while you measure voltage at the starter motor with a multimeter.
• 3. If no voltage is present, the ignition switch or wiring may need inspection. If voltage is present, the starter motor may need replacement.

5. Replace Starter Motor (if necessary)

• 1. Disconnect the battery again for safety.
• 2. Remove the mounting bolts from the starter motor using a socket set.
• 3. Disconnect the electrical connectors from the starter motor.
• 4. Install the new starter motor by reversing the removal steps.
• 5. Reconnect the battery and test the vehicle.