my Honda CR-V Fifth Generation (2017-2022) remote start isn’t working, what can I do

Honda CR-V 6th Gen (2023-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

516 words

Problem Statement

Learn how to diagnose and fix the remote start issue in Honda CR-V 2017-2022. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Ensure no tools are left in the engine compartment before reconnecting the battery.

Symptoms

•Remote start button on the key fob does not respond
•Vehicle does not start or attempt to start when remote start is activated
•No sound or indicator lights when attempting remote start
•Check engine light illuminated on the dashboard
•Key fob battery low warning

Diagnostic Steps

1
Check the key fob battery by attempting to start the vehicle directly with the key fob.
2
Inspect the remote start system fuse in the fuse box for any blown fuses.
3
Scan the vehicle's onboard diagnostic (OBD-II) system for any error codes related to the remote start system.
4
Verify that all doors, hood, and trunk are closed properly, as the remote start may not activate if any are open.
5
Confirm that the vehicle is in 'Park' and the brake pedal is not pressed when attempting to use the remote start.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flathead screwdriver
•Fuse puller or needle-nose pliers
•OBD-II scanner

Parts Required

•CR2032 key fob battery
•Replacement fuse

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the key fob battery by attempting to start the vehicle directly with the key fob.
2
Inspect the remote start system fuse in the fuse box for any blown fuses.
3
Scan the vehicle's onboard diagnostic (OBD-II) system for any error codes related to the remote start system.
4
Verify that all doors, hood, and trunk are closed properly, as the remote start may not activate if any are open.
5
Confirm that the vehicle is in 'Park' and the brake pedal is not pressed when attempting to use the remote start.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked safely with the engine off.
Disconnect the battery to prevent any electrical issues during the troubleshooting process.

2. Replace Key Fob Battery

Sub-steps:
1. Open the key fob using a small flathead screwdriver.
2. Remove the old battery and replace it with a new CR2032 battery.
3. Reassemble the key fob and test the remote start function.
Tools Required: Small flathead screwdriver

3. Inspect and Replace Remote Start Fuse

Sub-steps:
1. Locate the fuse box in the engine compartment or passenger area.
2. Identify the fuse associated with the remote start feature using the fuse diagram.
3. Remove the fuse and inspect it for continuity.
4. If it is blown, replace it with a new fuse of the same amperage.
Tools Required: Fuse puller or needle-nose pliers

4. Reset the Remote Start System

Sub-steps:
1. Reconnect the battery if it was disconnected.
2. Turn on the ignition without starting the engine.
3. Leave the ignition on for about 10 minutes to reset the system.
4. Turn off the ignition and test the remote start feature.
Safety Warnings: Ensure no tools are left in the engine compartment before reconnecting the battery.