my Honda CR-V Fifth Generation (2017-2022) is shaking when I accelerate what's wrong

Honda CR-V 6th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

473 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before inspecting the exhaust or drivetrain components.

Symptoms

•Shaking or vibration felt through the steering wheel or seat during acceleration
•Increased noise from the engine or transmission
•Poor acceleration performance
•Unusual tire wear patterns
•Steering wheel misalignment or pulling to one side

Diagnostic Steps

1
Inspect tires for proper inflation and signs of wear or damage.
2
Check for any visible damage to the suspension components, including struts, shocks, and control arms.
3
Perform a wheel balance and alignment check.
4
Scan the vehicle’s computer for diagnostic trouble codes (DTCs) using an OBD-II scanner.
5
Check for any fluid leaks under the vehicle, particularly from the transmission or differential.
6
Inspect the driveshaft and CV joints for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Wheel alignment machine
•Jack and jack stands

Parts Required

•Replacement tires (if needed)
•Suspension components (if damaged)
•Driveshaft or CV joint (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for proper inflation and signs of wear or damage.
2
Check for any visible damage to the suspension components, including struts, shocks, and control arms.
3
Perform a wheel balance and alignment check.
4
Scan the vehicle’s computer for diagnostic trouble codes (DTCs) using an OBD-II scanner.
5
Check for any fluid leaks under the vehicle, particularly from the transmission or differential.
6
Inspect the driveshaft and CV joints for wear or damage.

Solution

1. Preparation

Gather required tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery to prevent electrical shorts.

2. Tire Inspection and Replacement

Sub-steps:
1. Remove all four wheels using a socket set.
2. Inspect each tire for uneven wear, bulges, or punctures.
3. Replace any damaged tires with new ones of the same size and type.
4. Reinstall the wheels and torque the lug nuts to the manufacturer's specifications (typically 80-100 ft-lbs).

3. Suspension and Alignment Check

Sub-steps:
1. Inspect all suspension components for cracks, bends, or excessive wear.
2. Replace any damaged components (e.g., struts, bushings).
3. Perform a wheel alignment using an alignment machine.

4. Driveshaft and CV Joint Inspection

Sub-steps:
1. Raise the vehicle on jack stands for access to the undercarriage.
2. Visually inspect the driveshaft for any signs of damage or excessive play in the CV joints.
3. Replace any worn or damaged driveshaft or CV joints as necessary.