how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V 6th Gen (2023-Present)

Error Codes

less than 10 minutes

Time

easy

Difficulty

low

Severity

2 min read

345 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022) with this quick and easy guide. Step-by-step instructions included.

Affected Component

Electrical

Estimated Time

less than 10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral) with the parking brake engaged during the process.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle operates normally otherwise

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the vehicle is in the 'OFF' position.
3
Press the gas pedal three times within 10 seconds.
4
Turn the ignition switch to the 'OFF' position.
5
Turn the ignition switch back to the 'ON' position and check if the maintenance light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for the reset procedure.

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the vehicle is in the 'OFF' position.
3
Press the gas pedal three times within 10 seconds.
4
Turn the ignition switch to the 'OFF' position.
5
Turn the ignition switch back to the 'ON' position and check if the maintenance light has turned off.

Solution

1. Preparation

Gather all necessary tools and materials.
Ensure that the vehicle is parked on a level surface with the engine off.

2. Access the Ignition

Insert the key into the ignition or ensure the proximity key is within the vehicle.

3. Reset the Maintenance Light

Turn Ignition ON:
- Turn the ignition switch to the "ON" position without starting the engine.
Check Vehicle Status:
- Make sure no other warning lights are illuminated.
Press Gas Pedal:
- Fully depress the gas pedal three times within a span of 10 seconds.
Turn Ignition OFF:
- Turn the ignition switch back to the "OFF" position.
Verify the Reset:
- Turn the ignition switch to "ON" again and check that the maintenance light is off.