how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V 6th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

342 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022) with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface while performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights are present
•Reminder for oil change or service displayed on the instrument panel

Diagnostic Steps

1
Ensure the vehicle is in a safe location with the engine off.
2
Insert the key into the ignition or press the start button without starting the engine (for push-start models).
3
Ensure the odometer display is showing the total mileage, not trip A or trip B.
4
Turn the ignition to the ON position (do not start the engine).
5
Press the gas pedal three times within 5 seconds.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a safe location with the engine off.
2
Insert the key into the ignition or press the start button without starting the engine (for push-start models).
3
Ensure the odometer display is showing the total mileage, not trip A or trip B.
4
Turn the ignition to the ON position (do not start the engine).
5
Press the gas pedal three times within 5 seconds.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the ignition is off.
Gather necessary items (key fob or ignition key).

2. Access the Ignition

Insert the key into the ignition or use the push start button to access the ON position without starting the engine.

3. Change Odometer Display

Press the trip button on the dashboard until the odometer displays the total mileage.

4. Reset the Maintenance Light

Turn the ignition to the ON position (without starting the engine).
Quickly press the gas pedal three times within five seconds.
A confirmation message may appear on the dashboard indicating the maintenance light has been reset.