how to fix Honda CR-V Fifth Generation (2017-2022) transmission slipping when accelerating

Honda CR-V 6th Gen (2023-Present)

Error Codes

3-5 hours

Time

medium

Difficulty

high

Severity

3 min read

565 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid shock.
•Allow the engine to cool before working on the transmission.

Symptoms

•Transmission slipping or lagging when accelerating
•Unusual engine revving without corresponding acceleration
•Delayed or harsh shifting between gears
•Transmission warning light illuminated on the dashboard
•Fluid leaks under the vehicle
•Poor fuel economy

Diagnostic Steps

1
Scan the vehicle's computer for diagnostic trouble codes (DTCs) using an OBD-II scanner.
2
Check the transmission fluid level and condition; look for burnt smell or metal particles.
3
Inspect the transmission fluid cooler for blockages or leaks.
4
Test the vehicle's throttle position sensor (TPS) for proper operation.
5
Examine the transmission control module (TCM) for any signs of malfunction or corrosion.
6
Conduct a road test to replicate the symptoms while monitoring RPM and speed.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Wrench set
•Transmission fluid pump
•Fluid catch pan
•Torque wrench

Parts Required

•Honda ATF DW-1 transmission fluid
•Transmission filter
•Transmission pan gasket

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's computer for diagnostic trouble codes (DTCs) using an OBD-II scanner.
2
Check the transmission fluid level and condition; look for burnt smell or metal particles.
3
Inspect the transmission fluid cooler for blockages or leaks.
4
Test the vehicle's throttle position sensor (TPS) for proper operation.
5
Examine the transmission control module (TCM) for any signs of malfunction or corrosion.
6
Conduct a road test to replicate the symptoms while monitoring RPM and speed.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Check and Replace Transmission Fluid

Tools Required: Transmission fluid pump, funnel, wrench set, fluid catch pan.
Remove the transmission drain plug and let the old fluid drain into the catch pan.
Inspect the old fluid for debris or burnt smell.
Replace with new transmission fluid as specified in the owner’s manual (typically Honda ATF DW-1).
Torque the drain plug to the manufacturer's specifications (usually around 30 ft-lbs).

3. Inspect and Replace Transmission Filter

Remove the transmission pan by loosening the bolts with a socket wrench.
Carefully detach the transmission pan and replace the old filter with a new one.
Clean the transmission pan and magnet to remove any metal shavings.
Reinstall the pan using a new gasket and torque the bolts evenly to specifications.

4. Test and Reprogram TCM (if necessary)

If DTCs indicate TCM issues, consider reprogramming or replacing the TCM.
Use a compatible diagnostic tool to follow the reprogramming procedure as outlined in the service manual.
Clear any error codes after reprogramming.

5. Reconnect Battery and Road Test

Reconnect the negative battery terminal.
Start the vehicle and check for any leaks.
Perform a road test to ensure that the transmission engages properly without slipping.