how to fix Honda CR-V Fifth Generation (2017-2022) that shakes when braking

Honda CR-V 6th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

572 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking during braking in Honda CR-V (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the brakes to cool before working on them after driving.

Symptoms

•Steering wheel shakes when braking
•Vibration felt in the brake pedal
•Uneven wear on brake pads
•Noise from the brakes (squeaking or grinding)
•Vehicle pulls to one side during braking

Diagnostic Steps

1
Inspect brake pads and rotors for wear or damage using visual inspection techniques.
2
Check for any warped brake rotors by measuring rotor thickness with a micrometer.
3
Examine the brake calipers for proper function and ensure they are not stuck.
4
Inspect wheel lug nut torque to confirm they are tightened to the manufacturer's specifications.
5
Evaluate the wheel alignment and balance; check for any bent rims or damaged tires.
6
Scan the vehicle for any trouble codes that might indicate electronic brake system issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Brake cleaner
•C-clamp
•Torque wrench
•Rotor puller (if needed)

Parts Required

•Brake pads
•Brake rotors (if warped)
•Brake caliper hardware (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads and rotors for wear or damage using visual inspection techniques.
2
Check for any warped brake rotors by measuring rotor thickness with a micrometer.
3
Examine the brake calipers for proper function and ensure they are not stuck.
4
Inspect wheel lug nut torque to confirm they are tightened to the manufacturer's specifications.
5
Evaluate the wheel alignment and balance; check for any bent rims or damaged tires.
6
Scan the vehicle for any trouble codes that might indicate electronic brake system issues.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the negative battery terminal to ensure safety during repairs.

2. Inspect and Replace Brake Pads

Tools Required: Jack and jack stands, lug wrench, socket set, brake cleaner, C-clamp.
Remove the wheel using the lug wrench.
Inspect the brake pads for thickness; if less than 3mm, replace them.
If replacing, remove the caliper bolts using a socket set to access the brake pads.
Remove the old pads and compress the caliper piston using a C-clamp.
Install new brake pads, ensuring they are seated properly.
Reassemble the caliper and wheel, and torque the lug nuts to manufacturer specifications.

3. Inspect and Replace Brake Rotors

Tools Required: Torque wrench, rotor puller (if needed).
If rotors are warped (thickness variation greater than 0.002 inches), they must be replaced.
Remove the caliper and pads as detailed above.
Remove the rotor by loosening any retaining screws or clips and pulling it off the hub.
Install the new rotor, ensuring it is clean and free of contaminants.
Reinstall the caliper and brake pads, and torque the caliper bolts to specifications.

4. Wheel Alignment and Balancing

Tools Required: Alignment machine (typically done at a shop).
After replacing brake components, check wheel alignment and balance.
Adjust as necessary to ensure even tire wear and proper handling.