how do I fix the fog lights on my Honda CR-V Sixth Generation (2023-present)?

Solution

1. Preparation

• Gather tools and parts required.
• Ensure the vehicle is parked on a level surface with the ignition off.
• Disconnect the negative terminal of the battery to prevent electrical shock.

2. Inspect and Replace Fog Light Bulbs

• Tools Required: Socket set, gloves
• Sub-steps:
  1. Remove the fog light assembly from the bumper by unscrewing the retaining screws.
  2. Disconnect the electrical connector from the fog light.
  3. Remove the bulb by twisting it counterclockwise and pulling it out.
  4. Insert the new bulb into the socket by aligning the tabs and twisting it clockwise.
  5. Reconnect the electrical connector and reinstall the fog light assembly back into the bumper.

3. Check and Replace the Fog Light Fuse

• Tools Required: Fuse puller or needle-nose pliers
• Sub-steps:
  1. Locate the fuse box (usually under the dashboard or in the engine compartment).
  2. Identify the fog light fuse using the diagram on the fuse box cover.
  3. Remove the fuse using the fuse puller.
  4. Inspect the fuse for a broken filament; replace it with a new fuse of the same amperage if damaged.
  5. Reinsert the fuse into its slot securely.

4. Test the Wiring and Switch

• Tools Required: Multimeter
• Sub-steps:
  1. Reconnect the battery terminal.
  2. Set the multimeter to voltage mode and test the fog light connectors for voltage while activating the fog light switch.
  3. If no voltage is present, check the continuity of the fog light switch by disconnecting it and testing with the multimeter.
  4. Repair or replace any damaged wiring as necessary.