why is my Honda CR-V making a knocking noise when driving

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

488 words

Problem Statement

Learn how to diagnose and fix knocking noise in Honda CR-V. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely lifted and supported on jack stands before working underneath.

Symptoms

•Knocking noise when driving, particularly over bumps or rough surfaces
•Vibration felt through the steering wheel or floorboard
•Decreased handling or stability while driving
•Unusual tire wear patterns
•Check engine light may illuminate (if engine-related)

Diagnostic Steps

1
Inspect the vehicle visually for any obvious signs of damage or wear in suspension components.
2
Check for loose or damaged heat shields or exhaust components that could cause knocking.
3
Test drive the vehicle to determine if the noise changes with speed or steering input.
4
Lift the vehicle and check for play in wheel bearings and suspension joints using a pry bar.
5
Scan the vehicle's OBD-II system for any stored error codes that may indicate engine or transmission issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Pry bar
•OBD-II scanner

Parts Required

•Suspension components (bushings, control arms, struts)
•CV joints (if damaged)
•Engine or transmission mounts (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the vehicle visually for any obvious signs of damage or wear in suspension components.
2
Check for loose or damaged heat shields or exhaust components that could cause knocking.
3
Test drive the vehicle to determine if the noise changes with speed or steering input.
4
Lift the vehicle and check for play in wheel bearings and suspension joints using a pry bar.
5
Scan the vehicle's OBD-II system for any stored error codes that may indicate engine or transmission issues.

Solution

1. Preparation

Tools Required: Jack and jack stands, socket set, torque wrench, pry bar, OBD-II scanner
Park the vehicle on a flat surface and engage the parking brake.
Disconnect the battery to ensure safety while working on the vehicle.

2. Inspect Suspension Components

Sub-steps:
1. Lift the front of the vehicle using a jack and secure it with jack stands.
2. Inspect the control arms, bushings, and struts for any signs of wear or damage.
3. Use a pry bar to check for play in ball joints and other pivot points.
4. Replace any worn components as necessary.

3. Check Drivetrain Components

Sub-steps:
1. Inspect CV joints for any tearing or damage.
2. Check the transmission mount and engine mounts for wear or failure.
3. Replace any damaged mounts or CV joints.

Sub-steps:
1. Inspect the engine's accessory components (like the alternator and power steering pump) for proper function.
2. If knocking noise persists, perform a compression test to assess engine health.
3. Replace any faulty components based on findings.