why does my Honda CR-V strut make noise over bumps

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

494 words

Problem Statement

Learn how to diagnose and fix strut noise over bumps in Honda CR-V. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Ensure the vehicle is securely lifted before starting any work on the suspension system.

Symptoms

•Clunking or rattling noise when driving over bumps
•Diminished ride quality or increased harshness
•Uneven tire wear
•Vehicle pulling to one side
•Fluid leakage around the strut assembly

Diagnostic Steps

1
Inspect the strut assembly visually for any signs of damage or leakage.
2
Check the strut mounts for signs of wear or deterioration.
3
Perform a bounce test by pushing down on the front corners of the vehicle to assess the strut's rebound.
4
Inspect other suspension components, such as control arms and sway bar links, for damage or looseness.
5
Use a stethoscope or similar tool to pinpoint the location of the noise.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Jack stands
•Floor jack

Parts Required

•Strut assembly (if damaged)
•Strut mounts and bushings (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the strut assembly visually for any signs of damage or leakage.
2
Check the strut mounts for signs of wear or deterioration.
3
Perform a bounce test by pushing down on the front corners of the vehicle to assess the strut's rebound.
4
Inspect other suspension components, such as control arms and sway bar links, for damage or looseness.
5
Use a stethoscope or similar tool to pinpoint the location of the noise.

Solution

1. Preparation

Tools Needed: Socket set, torque wrench, jack stands, and a floor jack.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Disconnect the battery if necessary for electrical components.

2. Lift the Vehicle

Using a floor jack, lift the front of the vehicle and securely place jack stands under the frame.
Remove the front wheels for easier access to the strut assembly.

3. Remove Strut Assembly

Tools Needed: Socket set.
Remove the bolts securing the strut to the steering knuckle and the upper strut mount.
Carefully detach the strut assembly from the vehicle.

4. Inspect and Replace Components

Check the strut for leaks, dents, or physical damage.
Inspect strut mounts and bushings for wear; replace them if necessary.
If the strut is damaged or leaking, replace it with a new or remanufactured strut.

5. Reinstall Strut Assembly

Position the new or repaired strut assembly into place.
Secure the upper strut mount and lower strut to the steering knuckle using the designated torque specifications.
Reattach the front wheels and lower the vehicle back to the ground.

6. Final Checks

Ensure all fasteners are tightened to the manufacturer’s specifications using a torque wrench.
Reconnect the battery if it was disconnected.