why does my Honda CR-V shake when I accelerate

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

503 words

Problem Statement

Learn how to diagnose and fix shaking issues when accelerating in Honda CR-V. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath it.
•Disconnect the battery before working on electrical components to avoid shorts.

Symptoms

•Shaking or vibration felt in the steering wheel
•Increased shaking at higher speeds
•Noise accompanying the vibration (e.g., clunking or grinding)
•Steering wheel misalignment or pulling to one side
•Vibration that decreases or disappears when coasting

Diagnostic Steps

1
Inspect the tires for uneven wear or damage, and check tire pressure.
2
Perform a visual inspection of the suspension components, including control arms and bushings.
3
Check the drivetrain components, including the driveshaft and CV joints, for wear or damage.
4
Scan for error codes using an OBD-II scanner to identify any potential engine or transmission issues.
5
Test the engine and transmission mounts for signs of wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Tire pressure gauge
•Socket set
•Torque wrench
•Jack
•Jack stands
•CV joint removal tool

Parts Required

•Tires (if damaged)
•Control arms and bushings (if worn)
•CV joints (if damaged)
•Engine and transmission mounts (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the tires for uneven wear or damage, and check tire pressure.
2
Perform a visual inspection of the suspension components, including control arms and bushings.
3
Check the drivetrain components, including the driveshaft and CV joints, for wear or damage.
4
Scan for error codes using an OBD-II scanner to identify any potential engine or transmission issues.
5
Test the engine and transmission mounts for signs of wear or damage.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is off.
Disconnect the battery for safety if working on electrical components.

2. Tire Inspection and Replacement

Sub-step 1: Inspect the tires for uneven wear patterns. Replace any damaged or excessively worn tires.
Sub-step 2: Rotate the tires if they are not evenly worn.
Tools Required: Tire pressure gauge, tire iron, jack, jack stands.

3. Suspension Component Replacement

Sub-step 1: Inspect and replace any damaged control arms or bushings.
Sub-step 2: Tighten loose suspension components according to manufacturer specifications.
Tools Required: Socket set, torque wrench.

4. Drivetrain Inspection and Repair

Sub-step 1: Check the driveshaft for any signs of damage or imbalance.
Sub-step 2: Replace any worn or damaged CV joints.
Sub-step 3: Reinstall the driveshaft with proper torque specifications.
Tools Required: Socket set, torque wrench, possibly a CV joint removal tool.

5. Engine and Transmission Mounts Replacement

Sub-step 1: Inspect engine and transmission mounts for wear; replace if necessary.
Sub-step 2: Tighten all mounting bolts according to manufacturer specifications.
Tools Required: Socket set, torque wrench.