why does my Honda CR-V shake at high speeds

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

401 words

Problem Statement

Learn how to diagnose and fix shaking issues at high speeds in Honda CR-V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Ensure tires are cool before inspecting or working on them.

Symptoms

•Vibration noticeable in the steering wheel
•Shaking felt in the seat or floorboard
•Uneven tire wear observed
•Steering wheel pulling to one side
•Noises from the wheels (e.g., wobbling or thumping)

Diagnostic Steps

1
Inspect tire pressure and adjust to manufacturer's specifications.
2
Check for visible damage or defects in the tires (bulges, cuts, uneven wear).
3
Perform a wheel balance check using a wheel balancer.
4
Inspect wheel lug nut torque to ensure they are properly tightened.
5
Examine the suspension components for wear or damage (shocks, struts, bushings).
6
Check alignment settings to ensure they meet specifications.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Tire pressure gauge
•Wheel balancer
•Alignment machine

Parts Required

•Replacement tires (if necessary)
•Wheel weights (if balancing is required)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressure and adjust to manufacturer's specifications.
2
Check for visible damage or defects in the tires (bulges, cuts, uneven wear).
3
Perform a wheel balance check using a wheel balancer.
4
Inspect wheel lug nut torque to ensure they are properly tightened.
5
Examine the suspension components for wear or damage (shocks, struts, bushings).
6
Check alignment settings to ensure they meet specifications.

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is off.
Wear safety gloves and goggles.

2. Tire Inspection and Replacement

Sub-steps:
1. Remove the wheel cover if applicable using a flathead screwdriver.
2. Loosen the lug nuts using a lug wrench, but do not remove them completely while the vehicle is on the ground.
3. Lift the vehicle with a jack and secure it on jack stands.
4. Remove the lug nuts and take off the wheel.
5. Inspect the tire for damage and check tread depth.
6. If the tire is damaged or excessively worn, replace it with a new tire.
7. Reinstall the wheel and hand-tighten the lug nuts.

3. Wheel Balancing

Sub-steps:
1. Mount the wheel onto the wheel balancer.
2. Follow the machine's instructions to balance the wheel.
3. Add wheel weights as necessary to achieve proper balance.
4. Reinstall the balanced wheel on the vehicle.

4. Wheel Alignment

Sub-steps:
1. Take the vehicle to a professional alignment shop.
2. Ensure the alignment is adjusted to meet manufacturer specifications.
3. Perform a test drive post-alignment to confirm the fix.

Tools Required:

Jack and jack stands
Lug wrench
Tire pressure gauge
Wheel balancer
Alignment machine

Parts Required:

Replacement tires (if necessary)
Wheel weights (if balancing is required)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Always use jack stands when working under the vehicle.
Ensure tires are cool before inspecting or working on them.