FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda CR-V make a hissing noise from the steering pump? - Honda CR-V
Home/Cars/Honda/CR-V/Fifth Generation (2017-2022)/why does my Honda CR-V make a hissing noise from the steering pump?

why does my Honda CR-V make a hissing noise from the steering pump?

Honda CR-V Fifth Generation (2017-2022)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
562 words

Problem Statement

Learn how to diagnose and fix a hissing noise from the steering pump in Honda CR-V. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Steering
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool before opening any components near the engine.

Symptoms

  • •Hissing noise from the steering pump when turning the steering wheel
  • •Difficulty in steering or a feeling of stiffness
  • •Whining noise in addition to the hissing
  • •Power steering fluid leak observed under the vehicle
  • •Check engine or power steering warning light illuminated on the dashboard

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Screwdrivers
  • •Power steering fluid
  • •Pressure gauge

Parts Required

  • •Power steering fluid
  • •Power steering pump (if required)
  • •Power steering hoses (if damaged)

Additional Information

Affected Component
Steering
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts. Ensure the vehicle is parked on a level surface and the engine is off.
  • Tools Required: Socket set, screwdrivers, power steering fluid, pressure gauge.
2. Check and Refill Power Steering Fluid
  • Locate the power steering fluid reservoir.
  • Remove the cap and check the fluid level. If low, add the recommended type of power steering fluid until it reaches the proper level.
  • Safety Warning: Do not overfill the reservoir.
3. Inspect and Replace Power Steering Hoses
  • Visually inspect the power steering hoses for cracks, leaks, or wear.
  • If damaged, use a socket set to remove the hoses from the pump and reservoir.
  • Replace with new hoses and ensure all connections are tight.
  • Torque specifications will depend on the specific hose type; refer to the service manual.
4. Replace Power Steering Pump
  • Disconnect the negative battery terminal to ensure safety.
  • Remove the belts connected to the power steering pump using a wrench.
  • Unbolt the pump from its mounting location and disconnect the supply and return hoses.
  • Install the new power steering pump by reversing the removal process, ensuring all connections are tight.
  • Reattach the belts, ensuring they are properly tensioned.
5. Bleed the Power Steering System
  • Fill the power steering fluid reservoir to the proper level.
  • Start the engine and turn the steering wheel from lock to lock several times to bleed air from the system.
  • Check the fluid level again after bleeding and add more fluid if necessary.