why does my Honda CR-V Fifth Generation (2017-2022) AC blow warm air

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

584 words

Problem Statement

Complete guide to fixing AC that blows warm air in Honda CR-V (2017-2022). Includes symptoms, diagnostic steps, tools required, and repair procedures.

Affected Component

HVAC

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before opening any components.

Symptoms

•AC compressor does not engage
•Warm air blowing from vents
•Unusual noises from the AC system
•Visible refrigerant leaks under the vehicle
•AC control panel lights malfunctioning
•Weak airflow from vents

Diagnostic Steps

1
Check the AC temperature settings on the climate control system.
2
Inspect the AC system fuse for any blown fuses.
3
Use an OBD-II scanner to check for any error codes related to the HVAC system.
4
Inspect the refrigerant level using a manifold gauge set.
5
Listen for unusual noises when the AC is turned on to identify potential compressor issues.
6
Examine the AC compressor for signs of damage or leaks.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Manifold gauge set
•Refrigerant charging kit
•Serpentine belt tensioner tool
•Multimeter

Parts Required

•AC fuse (if blown)
•Refrigerant (R-134a)
•AC compressor (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the AC temperature settings on the climate control system.
2
Inspect the AC system fuse for any blown fuses.
3
Use an OBD-II scanner to check for any error codes related to the HVAC system.
4
Inspect the refrigerant level using a manifold gauge set.
5
Listen for unusual noises when the AC is turned on to identify potential compressor issues.
6
Examine the AC compressor for signs of damage or leaks.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to ensure safety while working on electrical components.
Allow the engine to cool before starting any work.

2. Check and Replace AC Fuse

Locate the fuse box in the engine compartment.
Identify the AC fuse using the diagram on the fuse box cover.
Remove the fuse using a fuse puller or pliers.
Inspect the fuse for continuity; replace it if it is blown.
Reconnect the battery and test the AC system.

3. Inspect and Recharge Refrigerant

Attach the manifold gauge set to the low and high-pressure service ports on the AC system.
Check the pressure readings; if low, proceed to recharge.
Use a refrigerant can with a charging hose; follow the instructions on the can.
Add refrigerant until the correct pressure is achieved (generally around 28-36 psi for low side, 200-250 psi for high side).
Disconnect the gauge set and check the system operation.

4. Test and Inspect AC Compressor

Start the engine and activate the AC system.
Check if the AC compressor is engaging; if not, inspect the electrical connections and relay.
If the compressor is damaged, replace it by:
- Removing the serpentine belt using a belt tensioner tool.
- Unbolting the compressor from its mounting bracket.
- Disconnecting the refrigerant lines (ensure the system is evacuated by a professional if refrigerant is still present).
- Installing the new compressor and reconnecting the refrigerant lines.
- Reinstalling the serpentine belt.

5. Finalize and Test System

Ensure all connections are tight and secure.
Reconnect the battery.
Perform a test drive to confirm the AC is blowing cold air.