FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what does it mean if my Honda CR-V Fifth Generation (2017-2022) brake light stays on - Honda CR-V
Home/Cars/Honda/CR-V/Fifth Generation (2017-2022)/what does it mean if my Honda CR-V Fifth Generation (2017-2022) brake light stays on

what does it mean if my Honda CR-V Fifth Generation (2017-2022) brake light stays on

Honda CR-V Fifth Generation (2017-2022)

Error Codes
1-3 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
556 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the brake light staying on in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems
  • •Allow the engine to cool before working near the brake components

Symptoms

  • •Brake light remains illuminated when the vehicle is off
  • •Warning light on the dashboard related to the braking system
  • •Brake pedal feels spongy or requires more force to engage
  • •Vehicle does not stop as quickly as expected
  • •Possible fluid leakage under the vehicle near the rear brakes

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Socket set
  • •Screwdriver set
  • •Pliers

Parts Required

  • •Brake light bulbs (if needed)
  • •Brake pedal position switch (if faulty)
  • •Brake fluid (if needed)

Additional Information

Affected Component
Brakes
Estimated Time
1-3 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Disconnect the battery to prevent electrical shorts.
2. Inspect Brake Pedal Position Switch
  • Locate the brake pedal position switch, usually mounted on the brake pedal assembly.
  • Disconnect the wiring harness from the switch.
  • Test the switch with a multimeter to check for continuity when the pedal is pressed.
    • If faulty, replace the switch.
3. Check Brake Fluid Level
  • Locate the brake fluid reservoir, typically found near the driver's side of the engine bay.
  • Inspect the fluid level; it should be between the "MIN" and "MAX" marks.
    • If low, top off with manufacturer-recommended brake fluid (usually DOT 3 or DOT 4).
    • If the fluid is low, check for leaks in the system.
4. Inspect Brake Light Bulbs
  • Access the brake light assembly by removing the relevant trim or access panel.
  • Remove the brake light bulbs and inspect for any burnt-out filaments.
  • Replace any faulty bulbs with new ones of the correct specification.
5. Check Wiring and Connectors
  • Visually inspect the wiring and connectors for signs of wear, corrosion, or damage.
  • Use a multimeter to check for voltage at the brake light circuit when the pedal is depressed.
    • Repair or replace any damaged wiring as necessary.
6. Final Assembly and Testing
  • Reassemble any components removed during inspection.
  • Reconnect the battery.
  • Test the brake lights by pressing the brake pedal to ensure they function correctly.