FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what causes engine stalling in Honda CR-V Fifth Generation (2017-2022) - Honda CR-V
Home/Cars/Honda/CR-V/Fifth Generation (2017-2022)/what causes engine stalling in Honda CR-V Fifth Generation (2017-2022)

what causes engine stalling in Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Fifth Generation (2017-2022)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
592 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine stalling issues in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening the hood or working on components.

Symptoms

  • •Engine unexpectedly shuts off during driving
  • •Difficulty restarting the engine after stalling
  • •Rough idling or engine misfires prior to stalling
  • •Warning lights illuminated on the dashboard
  • •Decreased fuel efficiency
  • •Unusual noises from the engine compartment

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Wrench set
  • •Torque wrench
  • •Multimeter
  • •Screwdriver set
  • •Fuel pressure gauge

Parts Required

  • •Fuel pump (if defective)
  • •Fuel filter (if clogged)
  • •Spark plugs (if worn)
  • •Ignition coils (if faulty)
  • •Mass airflow sensor (if defective)
  • •Throttle position sensor (if defective)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
7 items
Parts Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative terminal of the battery to ensure safety.
  • Allow the engine to cool before starting work.
2. Inspect and Replace Fuel System Components
  • Fuel Pump:
    • Locate the fuel pump relay and check for proper operation.
    • If faulty, replace the fuel pump.
    • Tools: Socket set, fuel pressure gauge.
  • Fuel Filter:
    • Locate the fuel filter and remove it.
    • Replace with a new fuel filter ensuring proper orientation.
    • Tools: Wrench set.
3. Check and Replace Ignition System Components
  • Spark Plugs:
    • Remove spark plugs using a spark plug socket.
    • Inspect for wear or fouling; replace if necessary with manufacturer-recommended plugs.
    • Torque to specifications (usually around 13 lb-ft for Honda).
  • Ignition Coils:
    • Remove ignition coil connectors and bolts.
    • Replace faulty ignition coils with new parts.
    • Tools: Socket set, torque wrench.
4. Test and Replace Sensors
  • Mass Airflow Sensor:
    • Unplug the MAF sensor connector and remove it from the intake.
    • Clean or replace the MAF sensor as necessary.
    • Tools: Screwdriver, MAF cleaner.
  • Throttle Position Sensor:
    • Locate the throttle body and remove the TPS connector.
    • Test with a multimeter and replace if out of spec.
    • Tools: Multimeter, screwdriver.
5. Verify Battery and Charging System
  • Use a multimeter to check battery voltage (should be around 12.6V when fully charged).
  • Inspect the alternator for proper output during engine operation.
  • Replace faulty battery or alternator as needed.
  • Tools: Multimeter.