FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda CR-V’s engine temperature gauge is high, what should I do - Honda CR-V
Home/Cars/Honda/CR-V/Fifth Generation (2017-2022)/my Honda CR-V’s engine temperature gauge is high, what should I do

my Honda CR-V’s engine temperature gauge is high, what should I do

Honda CR-V Fifth Generation (2017-2022)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
578 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix high engine temperature issues in Honda CR-V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Cooling System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always open the radiator cap when the engine is cool to prevent burns.
  • •Ensure the engine is cool before proceeding.
  • •Make sure the vehicle is off and cool during inspection.
  • •Be cautious of moving parts while the engine is running.

Symptoms

  • •Engine temperature gauge exceeds normal operating range
  • •Engine coolant may be leaking or low
  • •Steam or smoke from the engine compartment
  • •Warning lights illuminated on the dashboard
  • •Unusual engine noises (e.g., knocking or pinging)
  • •Decreased engine performance or power loss

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Multimeter
  • •Wrench set
  • •Pliers

Parts Required

  • •Coolant
  • •Thermostat
  • •Hoses (if damaged)
  • •Water pump (if leaking)

Additional Information

Affected Component
Cooling System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a flat surface and the engine is cool.
  • Gather necessary tools and parts.
2. Check and Refill Coolant
  • Sub-steps:
    1. Open the hood and locate the coolant reservoir.
    2. If the coolant is low, add the appropriate type of coolant (check owner’s manual for specifications).
    3. If the radiator is low, carefully remove the radiator cap and add coolant until full.
  • Tools Required: None specific, just coolant.
  • Safety Warnings: Always open the radiator cap when the engine is cool to prevent burns.
3. Inspect and Replace Thermostat (if faulty)
  • Sub-steps:
    1. Drain the coolant from the radiator.
    2. Remove the thermostat housing by unscrewing the bolts.
    3. Take out the old thermostat and inspect it for damage.
    4. Install a new thermostat in the same position.
    5. Reattach the thermostat housing and torque bolts to manufacturer specifications.
  • Tools Required: Socket set, torque wrench.
  • Safety Warnings: Ensure the engine is cool before proceeding.
4. Check and Repair Cooling System Leaks
  • Sub-steps:
    1. Inspect all hoses for cracks or leaks and replace any that are damaged.
    2. Check the water pump for leaks around the seal.
    3. Inspect the radiator for corrosion or leaks; replace if necessary.
  • Tools Required: Wrench set, pliers.
  • Safety Warnings: Make sure the vehicle is off and cool during inspection.
5. Verify Cooling Fan Operation
  • Sub-steps:
    1. Start the engine and allow it to reach operating temperature.
    2. Observe the cooling fan; it should engage when the temperature rises.
    3. If the fan does not operate, check the fuse and wiring, and replace the fan motor if necessary.
  • Tools Required: Multimeter to test electrical components.
  • Safety Warnings: Be cautious of moving parts while the engine is running.