FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda CR-V stalls when I come to a stop what's causing it - Honda CR-V
Home/Cars/Honda/CR-V/Fifth Generation (2017-2022)/my Honda CR-V stalls when I come to a stop what's causing it

my Honda CR-V stalls when I come to a stop what's causing it

Honda CR-V Fifth Generation (2017-2022)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
521 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix stalling issues in Honda CR-V. Step-by-step guide with symptoms, diagnostic steps, tools, and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening any components.

Symptoms

  • •Engine stalls when the vehicle comes to a stop
  • •Rough idle just before stalling
  • •Check engine light illuminated
  • •Difficulty restarting the engine immediately after stalling
  • •Decreased fuel efficiency
  • •Unusual engine noises (e.g., sputtering)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Fuel pressure gauge
  • •Throttle body cleaner
  • •MAF cleaner
  • •Line wrench

Parts Required

  • •Fuel filter
  • •Idle air control valve (if replacement is necessary)
  • •Throttle body cleaner
  • •MAF cleaner

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety while working on electrical components.
  • Allow the engine to cool before beginning repairs.
2. Clean the Throttle Body
  • Remove the air intake duct connected to the throttle body using a socket set.
  • Spray throttle body cleaner into the throttle body while opening the throttle plate manually.
  • Wipe clean with a lint-free cloth.
  • Reattach the air intake duct and ensure all clamps are tightened.
3. Replace Fuel Filter (if needed)
  • Locate the fuel filter (usually along the fuel line).
  • Use a line wrench to disconnect the fuel lines from the filter, being cautious of residual fuel.
  • Remove the old filter and install the new one, ensuring proper orientation.
  • Reconnect the fuel lines and tighten securely.
4. Test and Replace IACV (if faulty)
  • Locate the idle air control valve on the throttle body.
  • Disconnect the electrical connector and remove the IACV using a socket set.
  • Inspect for carbon buildup; clean as needed or replace with a new unit.
  • Reinstall the IACV and reconnect the electrical connector.
5. Check and Clean MAF Sensor
  • Remove the MAF sensor from the air intake duct.
  • Spray MAF cleaner onto the sensor elements (do not touch them).
  • Allow it to dry before reinstalling the sensor.