my Honda CR-V shakes when I accelerate, what could be causing this

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

477 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda CR-V. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the vehicle to cool before inspecting the engine or transmission components.

Symptoms

•Vehicle shakes or vibrates when accelerating
•Steering wheel vibration
•Increased engine noise
•Possible loss of power during acceleration
•Uneven tire wear

Diagnostic Steps

1
Inspect the tires for proper inflation and visible damage.
2
Check for wheel balance and alignment issues.
3
Scan the vehicle for any error codes using an OBD-II scanner.
4
Inspect the engine mounts for wear or damage.
5
Examine the driveshaft and CV joints for signs of wear or damage.
6
Test drive the vehicle to replicate the shaking and identify specific conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack and jack stands
•Lug wrench
•OBD-II scanner
•Socket set
•Torque wrench
•Engine hoist (if necessary)
•Pliers

Parts Required

•Tires (if necessary)
•Engine mounts (if damaged)
•Driveshaft or CV joints (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the tires for proper inflation and visible damage.
2
Check for wheel balance and alignment issues.
3
Scan the vehicle for any error codes using an OBD-II scanner.
4
Inspect the engine mounts for wear or damage.
5
Examine the driveshaft and CV joints for signs of wear or damage.
6
Test drive the vehicle to replicate the shaking and identify specific conditions.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is off.
Wear safety glasses and gloves.

2. Inspect and Replace Tires

Sub-steps:
1. Check tire pressure using a tire gauge; inflate to recommended PSI if low.
2. Inspect tires for bulges, cracks, or uneven wear.
3. If tires are damaged or excessively worn, replace them with new tires.
Tools Required:
- Tire pressure gauge
- Jack and jack stands
- Lug wrench

3. Wheel Balancing and Alignment

Sub-steps:
1. Take the vehicle to a tire shop for professional wheel balancing.
2. If necessary, have a professional perform a wheel alignment.
Tools Required:
- None (service performed by a tire shop)

4. Inspect and Replace Engine Mounts

Sub-steps:
1. Visually inspect engine mounts for cracks or separation.
2. If damage is found, support the engine with a jack and replace the engine mounts.
3. Torque new mounts to manufacturer specifications.
Tools Required:
- Socket set
- Torque wrench
- Engine hoist (if necessary)

5. Examine Driveshaft and CV Joints

Sub-steps:
1. Raise the vehicle and visually inspect the driveshaft and CV joints for any signs of wear or damage.
2. If any issues are identified, replace the affected components.
Tools Required:
- Socket set
- Pliers