FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda CR-V has low oil pressure what does it mean - Honda CR-V
Home/Cars/Honda/CR-V/Fifth Generation (2017-2022)/my Honda CR-V has low oil pressure what does it mean

my Honda CR-V has low oil pressure what does it mean

Honda CR-V Fifth Generation (2017-2022)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
598 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix low oil pressure in Honda CR-V. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Allow engine to cool before opening the oil pan.
  • •Disconnect the battery before working on electrical components.

Symptoms

  • •Oil pressure warning light illuminated on the dashboard
  • •Engine making tapping or knocking noises
  • •Decreased engine performance or responsiveness
  • •Oil leaks visible under the vehicle
  • •Increased engine temperature

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Oil pressure gauge
  • •Socket set
  • •Oil filter wrench
  • •Multimeter

Parts Required

  • •Engine oil (correct type and grade)
  • •Oil filter
  • •Oil pressure sending unit (if faulty)
  • •Oil pump (if faulty)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and materials.
  • Ensure the vehicle is on a level surface and the engine is cool.
  • Disconnect the battery for safety.
2. Change Engine Oil and Filter

  1. Drain Oil:

    • Place an oil catch pan under the oil pan.
    • Remove the drain plug using a socket set and allow the oil to drain completely.
    • Reinstall the drain plug and torque to manufacturer specifications (typically around 20-30 lb-ft).

  2. Remove Oil Filter:

    • Use an oil filter wrench to unscrew the old oil filter.
    • Lubricate the rubber gasket of the new oil filter with fresh oil, then install it by hand.

  3. Add New Oil:

    • Pour the recommended grade and type of new oil (check owner's manual) into the engine using a funnel.
    • Start with the amount specified (usually around 4-5 quarts).
    • Recheck the oil level with the dipstick and add more if necessary.
3. Inspect Oil Pressure Sending Unit

  1. Locate Sending Unit:

    • Find the oil pressure sending unit, usually near the oil filter or on the engine block.

  2. Test Sending Unit:

    • Disconnect the electrical connector.
    • Use a multimeter to check resistance and compare with specifications from the service manual.

  3. Replace Sending Unit:

    • If faulty, remove the sending unit with a wrench and install a new one.
    • Reconnect the electrical connector securely.
4. Check Oil Pump

  1. Access Oil Pump:

    • If low oil pressure persists, it may be necessary to access the oil pump.
    • Remove the oil pan by unscrewing the bolts and carefully prying it off.

  2. Inspect and Replace Oil Pump:

    • Visually inspect the oil pump for damage or wear.
    • If replacement is needed, remove the old pump and install a new one, ensuring proper alignment and sealing.