FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda CR-V Fifth Generation (2017-2022) power mirrors not adjusting what could be wrong - Honda CR-V
Home/Cars/Honda/CR-V/Fifth Generation (2017-2022)/my Honda CR-V Fifth Generation (2017-2022) power mirrors not adjusting what could be wrong

my Honda CR-V Fifth Generation (2017-2022) power mirrors not adjusting what could be wrong

Honda CR-V Fifth Generation (2017-2022)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
519 words

Problem Statement

Learn how to diagnose and fix power mirrors not adjusting in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent shock or short circuits.

Symptoms

  • •Power mirror switch does not respond when activated
  • •Mirrors remain in the same position regardless of adjustments
  • •Warning light on the dashboard may be illuminated
  • •No sound or movement from the mirror motors
  • •Other electrical components may be malfunctioning

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Trim removal tool
  • •Multimeter
  • •Jumper wires
  • •Screwdrivers (flathead and Phillips)

Parts Required

  • •Power mirror switch (if faulty)
  • •Fuses (if blown)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Disconnect the negative terminal of the battery to prevent electrical shock.
2. Check the Power Mirror Switch
  • Remove the trim panel surrounding the power mirror switch using a trim removal tool.
  • Disconnect the electrical connector from the switch.
  • Test the switch with a multimeter to ensure it is functioning properly. If faulty, replace it.
3. Inspect the Fuses
  • Locate the fuse box (usually under the dashboard or in the engine compartment).
  • Identify the fuse for the power mirrors and remove it.
  • Inspect the fuse to see if it is blown. Replace with an identical fuse rated for the same amperage if necessary.
4. Check the Wiring and Connectors
  • Inspect the wiring harness connected to the power mirrors for any signs of wear, fraying, or disconnection.
  • If any wiring issues are found, repair or replace the damaged sections as needed.
5. Test the Mirror Motors
  • Disconnect the power mirror connector from the mirror assembly.
  • Use jumper wires to apply direct power to the mirror motors to check for functionality. If the mirrors adjust when powered directly, the issue lies within the switch or wiring.
6. Reassemble and Test
  • Reconnect all connectors and trim panels.
  • Reconnect the negative terminal of the battery.
  • Test the power mirrors to ensure they are functioning correctly.