my Honda CR-V Fifth Generation (2017-2022) doesn't shift smoothly what’s the issue

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

547 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission shifting issues in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Allow the engine to cool before working on the transmission.
•Ensure the vehicle is securely lifted if working underneath it.

Symptoms

•Rough or jerky shifts during acceleration
•Delayed engagement when selecting drive or reverse
•Unusual noises during shifting (grinding or whining)
•Fluctuating RPMs while shifting
•Warning lights (such as check engine or transmission light) illuminated on the dashboard

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to check for any stored error codes.
2
Inspect the transmission fluid level and condition, looking for signs of contamination or burning smell.
3
Check for any visible leaks around the transmission pan and seals.
4
Test the transmission range sensor to ensure it is functioning correctly.
5
Evaluate the throttle position sensor (TPS) for proper operation, as it can affect shifting.
6
Inspect the transmission control module (TCM) for signs of failure or software issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Transmission fluid pump
•Multimeter
•Fluid catch pan

Parts Required

•Transmission fluid
•Transmission filter (if applicable)
•Transmission range sensor (if required)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to check for any stored error codes.
2
Inspect the transmission fluid level and condition, looking for signs of contamination or burning smell.
3
Check for any visible leaks around the transmission pan and seals.
4
Test the transmission range sensor to ensure it is functioning correctly.
5
Evaluate the throttle position sensor (TPS) for proper operation, as it can affect shifting.
6
Inspect the transmission control module (TCM) for signs of failure or software issues.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a level surface and secure.
Disconnect the battery to prevent electrical shorts.

2. Check and Change Transmission Fluid

Tools Required: Transmission fluid pump, socket set, fluid catch pan
Sub-steps:
1. Remove the transmission fluid dipstick and check fluid level.
2. If low or dirty, drain the old fluid by removing the transmission pan bolts and allowing it to empty into the catch pan.
3. Replace the transmission filter if applicable.
4. Reinstall the transmission pan with a new gasket and torque the bolts to manufacturer specifications.
5. Refill the transmission with the appropriate type and amount of fluid as per the owner's manual.

3. Inspect and Replace Transmission Range Sensor (if necessary)

Tools Required: Socket set, multimeter
Sub-steps:
1. Locate the transmission range sensor on the transmission.
2. Disconnect the electrical connector and use a multimeter to test the sensor's resistance according to manufacturer specifications.
3. If faulty, remove the sensor by unscrewing the mounting bolts and replace it with a new unit.
4. Reconnect the electrical connector and ensure it is secure.

4. Update or Reprogram Transmission Control Module (if necessary)

Tools Required: OBD-II scanner with programming capability
Sub-steps:
1. Connect the OBD-II scanner to the vehicle's diagnostic port.
2. Check for available software updates for the TCM.
3. Follow the scanner prompts to update or reprogram the TCM if updates are available.