how to reset tire pressure monitoring system on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Fifth Generation (2017-2022)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

395 words

Problem Statement

Learn how to reset the tire pressure monitoring system (TPMS) on Honda CR-V (2017-2022). Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure that tires are properly inflated before resetting the TPMS to avoid driving on under-inflated tires.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•Warning message indicating low tire pressure
•Tire pressure light remains on after tire pressure adjustment

Diagnostic Steps

1
Check the tire pressure of all tires using a reliable tire pressure gauge.
2
Ensure the spare tire (if equipped with a sensor) is inflated to the recommended pressure.
3
Verify that the TPMS warning light is not due to other issues, such as a malfunctioning sensor.
4
Confirm that all tires are properly seated on the wheels.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Tire pressure gauge

Parts Required

•None for the reset procedure, but consider new TPMS sensors if faulty.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the tire pressure of all tires using a reliable tire pressure gauge.
2
Ensure the spare tire (if equipped with a sensor) is inflated to the recommended pressure.
3
Verify that the TPMS warning light is not due to other issues, such as a malfunctioning sensor.
4
Confirm that all tires are properly seated on the wheels.

Solution

1. Preparation

Gather necessary tools:
- OBD-II scanner (if required for resetting)
- Tire pressure gauge
Ensure all tires are inflated to the manufacturer’s recommended pressure (found on the driver’s side door jamb).

2. Resetting the TPMS

Turn the ignition to the ON position (do not start the engine).
Locate the TPMS reset button:
- The button is typically located under the dashboard to the left of the steering wheel.
Press and hold the TPMS reset button:
- Hold the button until the TPMS indicator light blinks three times, then release it.
Start the engine:
- Allow the vehicle to run for a few minutes to complete the reset process.
Drive the vehicle:
- Drive at speeds of 30-60 mph for about 10 minutes to ensure the system recalibrates.