how to reset the tire pressure light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Fifth Generation (2017-2022)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

478 words

Problem Statement

Learn how to reset the tire pressure light on Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely before conducting any procedures.
•Make sure to check tire pressures when the tires are cold for accurate readings.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Incorrect tire pressure readings displayed
•Recent tire rotation or inflation performed
•Change in tire size or installation of new tires
•Tire pressure monitoring system malfunction warning (if applicable)

Diagnostic Steps

1
Check the tire pressures of all tires, including the spare, using a reliable tire pressure gauge.
2
Adjust the pressures to match the manufacturer-recommended specifications found on the driver’s side door jamb.
3
Verify that there are no visible damage or leaks in the tires that could affect pressure.
4
Determine if the vehicle's TPMS is functioning properly by attempting to reset it according to the owner's manual.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Owner’s manual

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the tire pressures of all tires, including the spare, using a reliable tire pressure gauge.
2
Adjust the pressures to match the manufacturer-recommended specifications found on the driver’s side door jamb.
3
Verify that there are no visible damage or leaks in the tires that could affect pressure.
4
Determine if the vehicle's TPMS is functioning properly by attempting to reset it according to the owner's manual.

Solution

1. Preparation

Gather necessary tools and ensure the vehicle is parked on a level surface with the engine off.
Check that all tires are at the recommended pressure.

2. Reset the TPMS

Locate the TPMS Reset Button:
- The TPMS reset button is typically located under the steering wheel or in the glove compartment. Refer to the owner's manual for the exact location.
Turn the Ignition On:
- Insert the key or press the start button to turn the ignition to the "ON" position without starting the engine.
Press and Hold the TPMS Reset Button:
- Press and hold the TPMS reset button until the tire pressure light blinks three times, then release it.
Start the Engine:
- Start the engine and allow the vehicle to run for at least 20 minutes to enable the TPMS to recalibrate.

3. Verify System Functionality

After the reset procedure, check if the tire pressure light remains off after driving the vehicle for a short distance.