how to reset the maintenance light on my Honda CR-V Fifth Generation (2017-2022)?

Honda CR-V Fifth Generation (2017-2022)

Error Codes

10 minutes

Time

easy

Difficulty

low

Severity

2 min read

322 words

Problem Statement

Learn how to reset the maintenance light on your Honda CR-V (2017-2022). Step-by-step guide to ensure your dashboard indicators function properly.

Affected Component

Electrical

Estimated Time

10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and on a level surface before beginning the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•Driver may receive reminders for upcoming service
•No other performance issues should be noted

Diagnostic Steps

1
Ensure the vehicle is parked and the ignition is turned off.
2
Turn the ignition switch to the 'ON' position (do not start the engine).
3
Press the gas pedal three times within 5 seconds.
4
Verify that the maintenance light blinks and then turns off.
5
Turn the ignition off and then start the engine to confirm the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked and the ignition is turned off.
2
Turn the ignition switch to the 'ON' position (do not start the engine).
3
Press the gas pedal three times within 5 seconds.
4
Verify that the maintenance light blinks and then turns off.
5
Turn the ignition off and then start the engine to confirm the reset.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is in a safe, stationary position.

2. Ignition Positioning

Insert the key into the ignition or ensure the key fob is in the vehicle.
Turn the ignition switch to the "ON" position without starting the engine.

3. Resetting the Maintenance Light

Press the gas pedal fully to the floor and release it three times within 5 seconds.
Observe the dashboard for the maintenance light; it should blink and then turn off.

4. Verification of Reset

Turn the ignition switch to the "OFF" position.
Start the engine to ensure the maintenance light does not illuminate.