how to reset the maintenance light on Honda CR-V Sixth Generation (2023-present)

Honda CR-V Fifth Generation (2017-2022)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

335 words

Problem Statement

Learn how to reset the maintenance light on a 2023 Honda CR-V. Step-by-step guide with diagnostic procedures and verification tips.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual transmission) before starting the procedure.

Symptoms

•Maintenance light remains illuminated on the dashboard
•No other warning lights are present
•Vehicle has undergone recent oil change or service

Diagnostic Steps

1
Turn the ignition to the 'ON' position without starting the engine.
2
Press the gas pedal three times within 5 seconds.
3
Turn the ignition off.
4
Turn the ignition back to the 'ON' position and check if the maintenance light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key
•Key fob

Parts Required

•None required for the light reset

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is in a safe, well-ventilated area.
Gather necessary tools like the vehicle's key or key fob.

2. Turn Ignition to ON

Insert the key into the ignition or press the start button to turn on the electronics without starting the engine.
Make sure all dashboard lights illuminate.

3. Reset Maintenance Light

Press the gas pedal three times rapidly within 5 seconds.
Ensure you complete this step before the ignition is turned off.

4. Turn Ignition Off

Turn the ignition switch to the "OFF" position.
Wait a few seconds to ensure the system resets.

5. Verify Reset

Turn the ignition back to the "ON" position.
Check the dashboard to confirm that the maintenance light is no longer illuminated.