how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Fifth Generation (2017-2022)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

290 words

Problem Statement

Learn how to reset the maintenance light on your Honda CR-V (2017-2022) with this simple step-by-step guide. Quick and easy procedure.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the ignition is off before performing any steps.

Symptoms

•Maintenance light illuminated on the dashboard
•No engine performance issues (as the light is purely for maintenance reminder)
•Oil change or service recently completed

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the gas pedal three times within 5 seconds.
3
Turn the ignition off and then back to the 'ON' position.
4
Verify if the maintenance light is still illuminated or if it has been reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked safely with the ignition off.

2. Access Ignition

Insert the key into the ignition and turn it to the "ON" position without starting the engine.

3. Reset Maintenance Light

Quickly press the gas pedal three times within 5 seconds.
Turn the ignition off to complete the reset process.

4. Verify Reset

Turn the ignition back to the "ON" position.
Check if the maintenance light has gone off.