how to reset the maintenance light on Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Fifth Generation (2017-2022)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

362 words

Problem Statement

Learn how to reset the maintenance light on Honda CR-V (2017-2022) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (for automatic transmissions) or neutral (for manual transmissions) before resetting the maintenance light.

Symptoms

•Maintenance light is illuminated on the dashboard
•Vehicle performance issues may not be present
•No other warning lights are showing

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition and turn it to the 'ON' position (do not start the engine).
3
Check if the odometer or trip meter is displayed on the dashboard.
4
If necessary, press the trip meter reset button until the trip meter is displayed.
5
Locate the maintenance reset button on the dashboard (typically found near the speedometer or odometer).

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required (only the vehicle's key)

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition and turn it to the 'ON' position (do not start the engine).
3
Check if the odometer or trip meter is displayed on the dashboard.
4
If necessary, press the trip meter reset button until the trip meter is displayed.
5
Locate the maintenance reset button on the dashboard (typically found near the speedometer or odometer).

Solution

1. Preparation

Sit in the driver's seat with the key in the ignition.
Ensure the vehicle is in a safe and stationary position.

2. Turn On the Ignition

Turn the key to the "ON" position without starting the engine.
Ensure that the dashboard lights illuminate but the engine remains off.

3. Reset the Maintenance Light

Press and hold the maintenance reset button.
While holding the maintenance reset button, turn the key to the "OFF" position and back to "ON" without starting the engine.
Continue to hold the button until the maintenance light blinks and then resets to "OFF".

4. Verify the Reset

Release the maintenance reset button.
Turn the ignition off and then on again to verify that the maintenance light is no longer illuminated.