how to fix the strut noise in Honda CR-V Fifth Generation (2017-2022)

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

552 words

Problem Statement

Learn how to diagnose and fix strut noise in Honda CR-V Fifth Generation (2017-2022). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under the vehicle.
•Ensure the vehicle is on a flat surface and the parking brake is engaged before lifting.

Symptoms

•Clunking or knocking noise when driving over bumps
•Rattling noise while driving on rough roads
•Excessive bouncing or swaying of the vehicle
•Uneven tire wear
•Reduced ride comfort

Diagnostic Steps

1
Inspect the strut assembly visually for any obvious signs of damage or wear.
2
Check for any loose or damaged strut mount bolts.
3
Perform a bounce test by pressing down on each corner of the vehicle to assess strut responsiveness.
4
Listen for noise while moving the steering wheel in place to check for strut mount issues.
5
Examine the condition of the strut boots for any tears or leaks.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Floor jack
•Jack stands
•Lug wrench
•Socket set
•Wrench set
•Torque wrench

Parts Required

•Strut assembly (if damaged)
•Strut mounts (if worn)
•Sway bar link (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the strut assembly visually for any obvious signs of damage or wear.
2
Check for any loose or damaged strut mount bolts.
3
Perform a bounce test by pressing down on each corner of the vehicle to assess strut responsiveness.
4
Listen for noise while moving the steering wheel in place to check for strut mount issues.
5
Examine the condition of the strut boots for any tears or leaks.

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a flat surface and engage the parking brake.
Use wheel chocks to secure the vehicle.

2. Lift the Vehicle

Tools Required: Floor jack, jack stands
Raise the front of the vehicle using a floor jack and securely support it on jack stands.

3. Remove the Wheel

Tools Required: Lug wrench
Remove the lug nuts and take off the front wheel to access the strut assembly.

4. Remove the Strut Assembly

Tools Required: Socket set, wrench set
Disconnect the sway bar link from the strut if necessary.
Remove the lower strut bolts connecting the strut to the steering knuckle.
Remove the upper strut mount nuts from the engine compartment.
Carefully pull the strut assembly out of the vehicle.

5. Inspect and Replace Components

Check the strut mount for wear and replace if necessary.
Inspect the strut for leaks. If damaged, replace the strut.
Replace any worn components, such as bushings or mounts.

6. Reinstall the Strut Assembly

Tools Required: Torque wrench
Position the new or inspected strut assembly back into the vehicle.
Reattach the upper strut mount nuts and lower strut bolts, tightening to the manufacturer's specified torque values.
Reconnect the sway bar link.

7. Reattach the Wheel and Lower the Vehicle

Replace the wheel and hand-tighten the lug nuts.
Lower the vehicle back to the ground and then fully tighten the lug nuts in a star pattern.