how to fix Honda CR-V Fifth Generation (2017-2022) if the mirrors won't adjust?

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

481 words

Problem Statement

Learn how to diagnose and fix mirror adjustment issues in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid shocks or shorts.

Symptoms

•Mirror adjustment switch unresponsive
•Mirrors stuck in one position
•No sound or movement when adjusting the mirrors
•Warning light illuminated on the dashboard
•Possible related electrical issues

Diagnostic Steps

1
Inspect the mirror adjustment switch for physical damage or debris.
2
Use an OBD-II scanner to check for any related error codes.
3
Verify power to the mirror adjustment switch using a multimeter.
4
Check the wiring harness connections at the switch and mirrors for corrosion or loose connections.
5
Test the mirror motors directly with a power source to determine if they are functional.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set
•Socket set
•Electrical contact cleaner

Parts Required

•Mirror switch (if defective)
•Mirror assembly (if motor is faulty)
•Wiring harness (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the mirror adjustment switch for physical damage or debris.
2
Use an OBD-II scanner to check for any related error codes.
3
Verify power to the mirror adjustment switch using a multimeter.
4
Check the wiring harness connections at the switch and mirrors for corrosion or loose connections.
5
Test the mirror motors directly with a power source to determine if they are functional.

Solution

1. Preparation

Gather tools: multimeter, screwdriver set, socket set, and electrical contact cleaner.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Inspect and Clean the Mirror Adjustment Switch

Remove the switch panel using a flathead screwdriver or trim removal tool.
Disconnect the electrical connector from the switch.
Use electrical contact cleaner to clean the terminals of the switch.
Reconnect the switch and test for functionality before reassembling.

3. Check and Repair Wiring

Visually inspect the wiring harness leading to the mirrors for any signs of wear or damage.
Use a multimeter to check for continuity in the wires.
Repair any damaged wires with solder and heat shrink tubing or replace the entire harness if necessary.

4. Test Mirror Motors

Remove the side mirrors from the vehicle to access the motor connections.
Connect a direct power source to the mirror motor terminals to check for movement.
If the motor does not operate, replace the mirror assembly.

5. Reassemble and Test

Reattach the mirrors to the vehicle.
Reconnect the switch panel and the negative battery terminal.
Test the mirror adjustment function to ensure everything is working correctly.