how to fix Honda CR-V Fifth Generation (2017-2022) air conditioning not working

Honda CR-V Fifth Generation (2017-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

565 words

Problem Statement

Learn how to diagnose and fix the air conditioning not working in Honda CR-V (2017-2022). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component

HVAC

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the hood to prevent burns.

Symptoms

•No cool air is blowing from the vents
•Unusual noises coming from the AC compressor
•AC compressor not engaging
•Foul odor from the AC vents
•AC control lights not illuminating
•Increase in cabin humidity

Diagnostic Steps

1
Check the AC control settings to ensure the system is set to the correct mode.
2
Inspect the AC fuse and relay for any signs of damage or failure.
3
Use an OBD-II scanner to check for any diagnostic trouble codes related to the AC system.
4
Measure the refrigerant pressure using a manifold gauge set to determine if the system is properly charged.
5
Inspect the AC compressor and its electrical connections for any visible damage or corrosion.
6
Check for leaks in the AC system using UV dye or electronic leak detector.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Manifold gauge set
•Socket set
•Wrench set
•Fuse puller
•Refrigerant recovery machine

Parts Required

•AC compressor (if faulty)
•AC refrigerant
•Fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the AC control settings to ensure the system is set to the correct mode.
2
Inspect the AC fuse and relay for any signs of damage or failure.
3
Use an OBD-II scanner to check for any diagnostic trouble codes related to the AC system.
4
Measure the refrigerant pressure using a manifold gauge set to determine if the system is properly charged.
5
Inspect the AC compressor and its electrical connections for any visible damage or corrosion.
6
Check for leaks in the AC system using UV dye or electronic leak detector.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to ensure safety while working on electrical components.
Allow the vehicle to cool down if the engine has been running.

2. Inspect and Replace Fuses

Tools Required: Fuse puller or pliers.
Locate the fuse box in the engine compartment and the cabin.
Check the AC-related fuses for continuity and replace any blown fuses with the same amperage rating.

3. Repair or Replace AC Components

Tools Required: Socket set, wrench set, manifold gauge set, refrigerant recovery machine (if needed), AC compressor oil.
If the compressor is not engaging, check the electrical connections and replace the compressor if necessary.
- Remove the serpentine belt to access the compressor.
- Disconnect electrical connectors and refrigerant lines (using the recovery machine to safely remove refrigerant).
- Replace with a new compressor and reattach connections.

4. Recharge the AC System

Tools Required: Manifold gauge set, refrigerant canister.
After repairs, connect the manifold gauge set to the low and high-pressure ports.
Follow manufacturer specifications to recharge the system with the appropriate type and amount of refrigerant.

5. Test the System

Reconnect the battery and start the engine.
Set the AC to maximum and check for proper cooling and functionality.